web analytics
inside of door treatment? - Forno Bravo Forum: The Wood-Fired Oven Community



Photo Galleries are back! Instructions below.

Dear forum users,
Thank you for your patience with the Photo galleries. We've got your galleries online!
We have finished writing a custom script to migrate the PhotoPlog to vBulletin5’s albums.

Unfortunately V-Bulletin killed the "Photoplogs" in their software upgrade which was unforeseen and we're the first development group to have written a script for getting the galleries back... that said, it took some time to reverse engineer the code and get the albums to move over seamlessly!

Forum users will be able to access their “PhotoPlog” images through their user profile page by clicking on the “Media” tab.
They will also be able to browse other albums by going to the albums page. (On the forum site, there is a link in the black bar beside “Forums” to the albums.)

In order for users to create an album please follow the steps below.
1) Go to user profile page and click “Media”
2) Click Add Photos
3) Enter Photo Gallery Title in the first field
4) Click Upload or Select from Photo Album to add photos
5) Click Post
6) Once posted, the album will be created as a “Topic” on the albums page for the public to see. The topic title will be the “Photo Gallery Title” they created before uploading their photos.

To create this migration path we used vBulletin5’s default album structure. Unfortunately, it won’t work like the “PhotoPlog” but is an album/gallery component on the forum now.
See more
See less

inside of door treatment?

  • Filter
  • Time
  • Show
Clear All
new posts

  • inside of door treatment?

    Door is now complete. Steps taken are shown in my album (link below if anyone interested). I have a question about the treatment I should use for the inside of oven door. It is steel and will rust over time. The outside of door is a high heat tremclad flat black but dont want this paint for the inside because of being close to food. Any ideas to stop rusting. Coat it with vegy oil or something? ....wayne
    Attached Files
    see below for my oven album of progress to date


  • #2
    Re: inside of door treatment?

    I wouldn't think the paint on the inside is a problem after the first firing.....I painted mine with heat proof paint and never thought about it!!

    But you could treat it like a cast iron fry pan. I just coat with oil and put in the oven to cure. It creates a rust free pan as long as you take care of it. And my paella pans are the same, cheap steel pan that is oiled between use to keep it from rusting.

    so, oil the back of the door, bake it and periodically oil again. That should work.

    Nice door!

    sigpicTiempo para guzarlos..... ...enjoy every sandwich!


    • #3
      Re: inside of door treatment?

      Whew...nice look...but how much does that thing weigh? You got forearms like Popeye?


      • #4
        Re: inside of door treatment?

        Maybee about 20 pounds or so. Not light! I actually have little chicken arms but I might end up with the popeye look after dealing with this door.....wayne
        see below for my oven album of progress to date



        • #5
          Re: inside of door treatment?

          Regardless of the weight, I love the look! Careful going in and out of the oven with that 'dozer. Mine's chipping my bricks on the reveal.
          Everyone makes mistakes. The trick is to make mistakes when nobody is looking.



          • #6
            Re: inside of door treatment?

            Nice problem to have...I've got the fever...waiting on "the cure".


            • #7
              Re: inside of door treatment?

              I'm almost afraid to say this....

              There are ceramic coatings for headers and exhaust maniflolds. One I have used is called jet-hot. I sent the exhaust manifold from my old car out there and it is now shiny and chrome like after 18 mos of heat cycles similar to the pizza oven. They also have other coating colors as well. I was making drawings for expanded metal and handles with a center core of isoboard. My plan was to send the metal to a Jet hot faciltiy and get it ceramic coated...

              My wife thinks I'm going overboard......
              My oven progress -