web analytics
rain hat modifications? - Forno Bravo Forum: The Wood-Fired Oven Community


1 of 2 < >


Hello, Forno Bravo Community Forum members.

As many may have noticed already, the Community Forum site was briefly down today. While working on scheduled routine maintenance, we encountered an error when trying to add a software update. As the site is now back up and running, some of you may notice that some recent data has been misplaced from November 10th up to today. We are currently working on resolving the issue. The forum has full operational capabilities and we encourage all forum members to continue actively posting in the threads.

We apologize for any inconvenience that this issue may have caused you. The Forno Bravo family values each and every member of our community. If you have any issues or concerns, please feel free to let us know on our issues thread here:


Thank you for understanding.
2 of 2 < >

Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

rain hat modifications?

  • Filter
  • Time
  • Show
Clear All
new posts

  • rain hat modifications?

    Attachment shows the look of the underside of the rain hat flashing from below. I guess this would normaly be on top of some ones roof and no one would notice but in my case is will look a bit unfinished. Not sure what to do. A few ideas are to put a clay sleve with an outer diam of about 12" to just kind of fit under tthis flashing so you dont look up and see the screws holding the rain hat on and the big overhang. This clay stack would I guess go all the way from the top of my vent to the underside of flashing.Also I might just go with my river rock that will face the dome and continue it all the way up to the underside of flashing but not sure about this. Will my type N mortar stick to stainless stack etc? Any ideas appretiated...thanks wayne
    Attached Files
    see below for my oven album of progress to date