web analytics
flue vent - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse

I'm Peter Reinhart! Ask Me Anything! Monday, February 15, 2016 7:00-8:00 pm EST

To kick off our AMA feature, we have invited author, chef and master bread maker and host of Pizza Quest, Peter Reinhart, to be our first host! Peter will be in the Forum on Monday, February 15th, from 7:00 - 8:00 pm EST. If you are unable to be online during the live session, you can post your questions in the sticky post. Peter will answer those questions during the live session on February 15th. You can view Peter's answers to your questions as well as what happened during the live session in the session thread.

Ask Me Anything New Forum Feature

You will notice a new forum at the top of the main page called, "Ask Me Anything". This forum will be used for live one hour "Ask Me Anything" (AMA) sessions hosted by people who are knowledgeable in different areas pertaining to wood fired ovens. How it works:
- Each AMA will have a "sticky" thread where the community can post questions they would like answered during the live session. This will allow everyone to participate even if you can't be online for the live session. These questions will not be answered by the host until the live AMA; if you need an answer quickly, you should post it in the appropriate Forum area for the community to respond.
- Another thread will be posted for the live AMA. Registered users who are logged in during the live session can interact with the host by asking questions and receiving responses.
- The live thread will remain in the AMA forum to view after the session.

We hope you enjoy this new feature! Please let us know if there is a topic that you'd like to have as an AMA and we'll look for a host!

Forno Bravo
See more
See less

flue vent

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • flue vent

    i am building a brick oven in the igloo shape but i would like the chimney in the center,can i form a 2 inch x 4 inch steel manifold to the shape of the oven,an then cover it in bricks to put the chimney in the center?

  • #2
    Re: flue vent

    Take a look at this photo link.

    PhotoPlog - Vent and Chimney

    This is the form we use to center the chimney on our Napolino, Napoli and Vesuvio style ovens.

    We modify the vent landing on the front casted dome and install the form. Then we secure the anchor plate to the top center and pour High Temp Mortar into the channel.

    Comment


    • #3
      Re: flue vent

      thank you for the pic. and the information ,i'm going to try this in stainless steel and see if it works.

      Comment

      Working...
      X