web analytics
Stainless Steel Front Entry - Forno Bravo Forum: The Wood-Fired Oven Community


1 of 3 < >

Forum Page Loading Response

Forum Members:

We have received feedback regarding recent issues with page loading response time. We believe the slow response issue stems from the analytics we added with the new Forum. We are in the process of reconfiguring those elements and, after an approximate 24-hour time period for the reconfiguration to run, we anticipate a return to normal page load times. Thank you for your patience!
2 of 3 < >


Hello, Forno Bravo Community Forum members.

As many may have noticed already, the Community Forum site was briefly down today. While working on scheduled routine maintenance, we encountered an error when trying to add a software update. As the site is now back up and running, some of you may notice that some recent data has been misplaced from November 10th up to today. We are currently working on resolving the issue. The forum has full operational capabilities and we encourage all forum members to continue actively posting in the threads.

We apologize for any inconvenience that this issue may have caused you. The Forno Bravo family values each and every member of our community. If you have any issues or concerns, please feel free to let us know on our issues thread here:


Thank you for understanding.
3 of 3 < >

Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

Stainless Steel Front Entry

  • Filter
  • Time
  • Show
Clear All
new posts

  • Stainless Steel Front Entry

    Need some help. I have covered my oven in metal lather in preparation for stucco. I have carried the insulation to cover the chimney area but I am at a los whether to secure with metal lathe or concrete board/hardibacker. The metal lathe is exactly easy to work worth to create smooth crisp lines around my chimney area. Where should I proceed from here? I have ttached some pictures so everyone can visualize what I'm talking about.
    Attached Files

  • #2
    Re: Stainless Steel Front Entry

    I can't see any insulation in your pics. You can secure the blanket's form with some mesh. Most folk then give it a layer of vermicrete to even out all the lumps and bumps, then do a layer of stucco. Or are you intending to build a dog kennel over the thing? Either way you may as well cover the entry in blanket too.
    Last edited by david s; 09-15-2013, 02:03 PM.
    Kindled with zeal and fired with passion.


    • #3
      Re: Stainless Steel Front Entry


      Thanks for the reply. I wanted to show pictures of the metal (dog house) that was supplied by FB for the build before I attached the metal lathe. I went ahead & attached the lathe over the insulation and around the chimney area.


      • #4
        Re: Stainless Steel Front Entry

        Originally posted by kkgator View Post
        I wanted to show pictures of the metal (dog house) that was supplied by FB for the build before I attached the metal lathe.
        Supplied from Forno Bravo?
        It looks like the first year apprentice made it as a homework project.......
        The English language was invented by people who couldnt spell.

        My Build.