web analytics
Crap, some help on the face - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse

Photo Galleries are back! Instructions below.

Dear forum users,
Thank you for your patience with the Photo galleries. We've got your galleries online!
We have finished writing a custom script to migrate the PhotoPlog to vBulletin5’s albums.

Unfortunately V-Bulletin killed the "Photoplogs" in their software upgrade which was unforeseen and we're the first development group to have written a script for getting the galleries back... that said, it took some time to reverse engineer the code and get the albums to move over seamlessly!

Forum users will be able to access their “PhotoPlog” images through their user profile page by clicking on the “Media” tab.
They will also be able to browse other albums by going to the albums page. (On the forum site, there is a link in the black bar beside “Forums” to the albums.)

In order for users to create an album please follow the steps below.
1) Go to user profile page and click “Media”
2) Click Add Photos
3) Enter Photo Gallery Title in the first field
4) Click Upload or Select from Photo Album to add photos
5) Click Post
6) Once posted, the album will be created as a “Topic” on the albums page for the public to see. The topic title will be the “Photo Gallery Title” they created before uploading their photos.


To create this migration path we used vBulletin5’s default album structure. Unfortunately, it won’t work like the “PhotoPlog” but is an album/gallery component on the forum now.
See more
See less

Crap, some help on the face

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Crap, some help on the face

    Crap, i started to enclose my oven with 1/2" concrete board and have installed it all around the sides and back.
    the front of the oven i just have it installed on top half so i can complete the arch etc.

    my problem is a miscalculated when building my brick arch not figureing the brick needs to stick out from the board.

    Can i use 1/4" on the bottom half and tape the seem where they meet, put a skim coat of mortar on the seem to blend it, then apply stone veneer?

    See attached bad drawing

    Any help would be great.

    Thanks
    Attached Files

  • #2
    Re: Crap, some help on the face

    What does it matter if the arch brick are recessed?

    Comment


    • #3
      Re: Crap, some help on the face

      Problem is the arch is built already and some if the bricks are set to stick out 1/2 inch from the board and some are recessed

      I'm not a mason and just proved it

      My thought was if I went with 1/4" it might mask it slightly

      Thoughts?

      Comment


      • #4
        Re: Crap, some help on the face

        So, a 1/4" is all you would be gaining. I don't this making a difference with a stone veneer.
        Old World Stone & Garden

        Current WFO build - Dry Stone Base & Gothic Vault

        When we build, let us think that we build for ever.
        John Ruskin

        Comment


        • #5
          Re: Crap, some help on the face

          If you want to hide a mistake, it seldom works to try and make it smaller, make it larger and it will look intentional. If you are working with a +/- of 1/4" on the arch brick, make the arch revel 3/4"-1" and it will not be seen.

          Comment

          Working...
          X