web analytics
Looking for advice on install for PRO TE120. - Forno Bravo Forum: The Wood-Fired Oven Community


1 of 4 < >

Forum Page Loading Response

Forum Members:

We have received feedback regarding recent issues with page loading response time. We believe the slow response issue stems from the analytics we added with the new Forum. We are in the process of reconfiguring those elements and, after an approximate 24-hour time period for the reconfiguration to run, we anticipate a return to normal page load times. Thank you for your patience!
2 of 4 < >


Hello, Forno Bravo Community Forum members.

As many may have noticed already, the Community Forum site was briefly down today. While working on scheduled routine maintenance, we encountered an error when trying to add a software update. As the site is now back up and running, some of you may notice that some recent data has been misplaced from November 10th up to today. We are currently working on resolving the issue. The forum has full operational capabilities and we encourage all forum members to continue actively posting in the threads.

We apologize for any inconvenience that this issue may have caused you. The Forno Bravo family values each and every member of our community. If you have any issues or concerns, please feel free to let us know on our issues thread here:


Thank you for understanding.
3 of 4 < >

Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
4 of 4 < >

Burner Tech Support

Forno Bravo has implemented an on line resource for our Commercial Customers to easily access technical information on their ovens.

Included in this section are the following items:

Type 1 Hood Design

FAQ for Burner Support

Wiring Diagram for your control box

Manuals for many of the component parts

Factory Settings for the Omega Control module

Recommended Spare Parts list

Just follow the link below and you can get their. Of course, you can always call in for support during our normal business hours or create a ticket through our on line support email.


Thanks for participating in our Forum
See more
See less

Looking for advice on install for PRO TE120.

  • Filter
  • Time
  • Show
Clear All
new posts

  • Looking for advice on install for PRO TE120.

    We are looking at FINALLY installing our Professionale TE120 in our 25' enclosed car hauler trailer and I could use some advice.

    I know it has to sit above the axles to make it easier to tow but we have decided we want the oven on one side of the trailer so we can move around it. My metal worker friend has suggested a 'trolly' system and is very confident that we can move the oven into the centre for transport without any issues.

    I would like to know what the best height is for one of these ovens to make sure our backs don't take too much stress from bending over all the time.

    I am open to hearing anything you fine folk have to offer about design of our stand or trailer but what I am really concerned with is the height.

    Thanks so much!

    Matt in Ontario, Canada

  • #2
    Re: Looking for advice on install for PRO TE120.

    does anyone have any insight? I'd hate to have it at the wrong height...

    What height do you guys have your ovens at?



    • #3
      Re: Looking for advice on install for PRO TE120.

      Well I haven't finished mine yet and I am surprised no one has answered this simple question but if you are my height - 6" (183cm) then the height I have built mine is 1.1m to the hearth from ground level.
      I chose this based on what other people have said on this forum.


      • #4
        Re: Looking for advice on install for PRO TE120.

        The height is a preference thing, put it where you want. I usually build them at just above elbow height.
        Old World Stone & Garden

        Current WFO build - Dry Stone Base & Gothic Vault

        When we build, let us think that we build for ever.
        John Ruskin


        • #5
          Re: Looking for advice on install for PRO TE120.


          Smart move thinking through all of these fine details. Oven height is VERY important. It is definitely a matter of preference and based on ergonomics of the people who will be using it. I designed my oven at 42" based on standard bar-table height. My family is on the shorter side. My youngest daughter complains it is too high for her and wants me to build a step. I also set up a mock-WFO (i.e. WFO-simulator) and had my family step up and simulate making a pizza. For me, 42 inches seemed the best and I have no complaints.


          • #6
            Re: Looking for advice on install for PRO TE120.

            Hi Smokehouse

            I built mine 1.1 metres and it is fine for me. I can use it fine and those seated outside can see the show happening inside the oven as well. It is like Stonecutter said, it is about personal preference.

            Good luck with it.
            Cheers ......... Steve

            Build Thread http://www.fornobravo.com/forum/f3/n...erg-19151.html

            Build Pics http://www.facebook.com/media/set/?s...1&l=1626b3f4f4

            Forno Food Pics https://www.facebook.com/media/set/?...1&l=1d5ce2a275


            • #7
              Re: Looking for advice on install for PRO TE120.

              Around elbow height is the general consensus, but you get used to whatever height you have. There is another problem regarding this decision for a mobile oven and that is centre of gravity. What might be ideal when working the oven may be less than ideal when transporting it. A high centre of gravity, particularly if your trailer has a single axle can create some nasty surprises. Suggest you make the working height lower than you'd prefer so the centre of gravity is not too high. Your trolley idea is a good one. Mine is on a trolley and I roll it on and off my trailer each time it is used so I can use the trailer for other stuff.
              Kindled with zeal and fired with passion.