web analytics
Dimensions of a metal stand for Ristorante 130 - Forno Bravo Forum: The Wood-Fired Oven Community


1 of 2 < >

Photo Galleries are back! Instructions below.

Dear forum users,
Thank you for your patience with the Photo galleries. We've got your galleries online!
We have finished writing a custom script to migrate the PhotoPlog to vBulletin5’s albums.

Unfortunately V-Bulletin killed the "Photoplogs" in their software upgrade which was unforeseen and we're the first development group to have written a script for getting the galleries back... that said, it took some time to reverse engineer the code and get the albums to move over seamlessly!

Forum users will be able to access their “PhotoPlog” images through their user profile page by clicking on the “Media” tab.
They will also be able to browse other albums by going to the albums page. (On the forum site, there is a link in the black bar beside “Forums” to the albums.)

In order for users to create an album please follow the steps below.
1) Go to user profile page and click “Media”
2) Click Add Photos
3) Enter Photo Gallery Title in the first field
4) Click Upload or Select from Photo Album to add photos
5) Click Post
6) Once posted, the album will be created as a “Topic” on the albums page for the public to see. The topic title will be the “Photo Gallery Title” they created before uploading their photos.

To create this migration path we used vBulletin5’s default album structure. Unfortunately, it won’t work like the “PhotoPlog” but is an album/gallery component on the forum now.
2 of 2 < >

Burner Tech Support

Forno Bravo has implemented an on line resource for our Commercial Customers to easily access technical information on their ovens.

Included in this section are the following items:

Type 1 Hood Design

FAQ for Burner Support

Wiring Diagram for your control box

Manuals for many of the component parts

Factory Settings for the Omega Control module

Recommended Spare Parts list

Just follow the link below and you can get their. Of course, you can always call in for support during our normal business hours or create a ticket through our on line support email.


Thanks for participating in our Forum
See more
See less

Dimensions of a metal stand for Ristorante 130

  • Filter
  • Time
  • Show
Clear All
new posts

  • Dimensions of a metal stand for Ristorante 130

    I have to get a metal stand fabricated for the Ristorante 130.

    My contractor came up with these dimensions, but I don't know where he got them.

    87x76 38"high

    I think that the current model, Modena 140W (55') should be about the same size, but I don't have the dimensions for that stand, either.


  • #2
    Re: Dimensions of a metal stand for Ristorante 130


    It looks like a stand of 58 x 72 would be the minimum for the oven. I didn't spend a lot of time but I assume this does not include insulation/ enclosure. My cooking surface is 41 inches high and I think 47 would have been better (I'm 5'10"").


    Check out my pictures here:

    If at first you don't succeed... Skydiving isn't for you.


    • #3
      Re: Dimensions of a metal stand for Ristorante 130

      Thanks, Les. The contractor came up with dimensions larger than yours. I don't want it to take up unnecessary space, so I hope that he knows what he's doing.

      Congratulations on your oven! It's beautiful. I can't imagine that I'll build one at my house (at least for now), since I'll have one at the restaurant. But, if I do, I'll consult with you. You did a great job. You must have the best parties in town, maybe in the county!