web analytics
Two-day Bread Bake - Forno Bravo Forum: The Wood-Fired Oven Community



Photo Galleries are back! Instructions below.

Dear forum users,
Thank you for your patience with the Photo galleries. We've got your galleries online!
We have finished writing a custom script to migrate the PhotoPlog to vBulletin5’s albums.

Unfortunately V-Bulletin killed the "Photoplogs" in their software upgrade which was unforeseen and we're the first development group to have written a script for getting the galleries back... that said, it took some time to reverse engineer the code and get the albums to move over seamlessly!

Forum users will be able to access their “PhotoPlog” images through their user profile page by clicking on the “Media” tab.
They will also be able to browse other albums by going to the albums page. (On the forum site, there is a link in the black bar beside “Forums” to the albums.)

In order for users to create an album please follow the steps below.
1) Go to user profile page and click “Media”
2) Click Add Photos
3) Enter Photo Gallery Title in the first field
4) Click Upload or Select from Photo Album to add photos
5) Click Post
6) Once posted, the album will be created as a “Topic” on the albums page for the public to see. The topic title will be the “Photo Gallery Title” they created before uploading their photos.

To create this migration path we used vBulletin5’s default album structure. Unfortunately, it won’t work like the “PhotoPlog” but is an album/gallery component on the forum now.
See more
See less

Two-day Bread Bake

  • Filter
  • Time
  • Show
Clear All
new posts

  • Two-day Bread Bake


    Here's a brief log of a two-day bread bake from last week. It shows, in part, how a high mass oven works, something I'm still exploring.


    Hearth brick at 203 from previous bake. Fire started at 7 AM; two full burns. Hearth at 920 F by noon. Rake out, door in place and moderate for two hours. Brush out, spray heavily with a garden sprayer to generate steam, replace door. Swab deck. Begin bake at 575 F air temp. First in (sprayed over the breads just after loading): 8 baguette, time 18 minutes to an internal temp of 205 F. Next in (sprayed): 8 olive/thyme boule, time 22 minutes. Next in (sprayed): 8 sourdough boule, time 25 minutes. Next in (sprayed): 8 rye boule, time 25 minutes. All boule weighed in a 1 kilogram and reached an internal temp of 205-210.


    Six-thirty AM: hearth brick at 365 F, slab at 343, dome at 403, cladding at 409. Small fire started at 7 AM. Nine AM: hearth at 817, slab at 333, cladding at 411, dome at 734. Fire still burning. Eleven AM: rake out, door in place, moderate for two hours. Swab deck, spray. One PM: first bake of enriched kaiser rolls, 42 at a time on 7 sheet pans, no spraying over these. Hearth at 617, slab at 352, dome at 580, cladding at 481; air temp 550 F. Time: 12 minutes to an internal temp of 190 F. Second bake of 42 rolls at 3:30 PM. Time 12 minutes to an internal temp of 200 F. After the second bake: hearth 493, slab 377, dome 504, cladding 485. Third bake at 4:15. Bake time: 12 minutes to an internal temp of 195. After the bake: hearth at 453, slab 384, dome 474, cladding 475.

    Nine-thirty PM: Air temp 350 with door off. Ten pound seared beef roast with beef stock and wine halfway up the meat (plus onions, carrots, celery, bay, etc.) in a heavy, lidded Le Crueset oval roaster goes in, not directly on the brick, but on a rack. Left the door off to lower heat overnight.

    Sunday: Roast out at 8 AM. Some tender.

    This might be of interest to members branching out into bread baking. It's certainly fascinating to see how retained heat in a high mass oven performs.

    "Made are tools, and born are hands"--William Blake, 1757-1827

  • #2
    Very interesting Jim,

    How hot was the oven after the roast came on on Sunday?

    My Oven Thread:


    • #3


      Left the door off overnight, so the hearth was at 250 F when I took out the roast. Put the door back on as an experiment, and the hearth temp rose to 275 in about an hour.

      "Made are tools, and born are hands"--William Blake, 1757-1827