web analytics
portland cement to vermiculite - Forno Bravo Forum: The Wood-Fired Oven Community



Photo Galleries are back! Instructions below.

Dear forum users,
Thank you for your patience with the Photo galleries. We've got your galleries online!
We have finished writing a custom script to migrate the PhotoPlog to vBulletin5’s albums.

Unfortunately V-Bulletin killed the "Photoplogs" in their software upgrade which was unforeseen and we're the first development group to have written a script for getting the galleries back... that said, it took some time to reverse engineer the code and get the albums to move over seamlessly!

Forum users will be able to access their “PhotoPlog” images through their user profile page by clicking on the “Media” tab.
They will also be able to browse other albums by going to the albums page. (On the forum site, there is a link in the black bar beside “Forums” to the albums.)

In order for users to create an album please follow the steps below.
1) Go to user profile page and click “Media”
2) Click Add Photos
3) Enter Photo Gallery Title in the first field
4) Click Upload or Select from Photo Album to add photos
5) Click Post
6) Once posted, the album will be created as a “Topic” on the albums page for the public to see. The topic title will be the “Photo Gallery Title” they created before uploading their photos.

To create this migration path we used vBulletin5’s default album structure. Unfortunately, it won’t work like the “PhotoPlog” but is an album/gallery component on the forum now.
See more
See less

portland cement to vermiculite

  • Filter
  • Time
  • Show
Clear All
new posts

  • portland cement to vermiculite

    whats the mix ration porland cement to vermiculite for the below floor isalation layer.

  • #2
    Re: portland cement to vermiculite

    complete instructions:

    Pompeii Oven | Brick Oven Hearth
    My geodesic oven project: part 1, part 2


    • #3
      Re: portland cement to vermiculite

      Some have used ratios as rich as 5 to 1 and many of us have used 9-10 to 1. I used 9+ to 1 using the slurry method (cvduke's method) and had no problems using that lean a mix. Do a search with "cvduke" in the search box and you should get his thread on the method.

      The leaner the mix the better the insulation value for a given thickness.

      Hope that helps,