web analytics
Andiamo 70 Curing - Forno Bravo Forum: The Wood-Fired Oven Community



Photo Galleries are back! Instructions below.

Dear forum users,
Thank you for your patience with the Photo galleries. We've got your galleries online!
We have finished writing a custom script to migrate the PhotoPlog to vBulletin5’s albums.

Unfortunately V-Bulletin killed the "Photoplogs" in their software upgrade which was unforeseen and we're the first development group to have written a script for getting the galleries back... that said, it took some time to reverse engineer the code and get the albums to move over seamlessly!

Forum users will be able to access their “PhotoPlog” images through their user profile page by clicking on the “Media” tab.
They will also be able to browse other albums by going to the albums page. (On the forum site, there is a link in the black bar beside “Forums” to the albums.)

In order for users to create an album please follow the steps below.
1) Go to user profile page and click “Media”
2) Click Add Photos
3) Enter Photo Gallery Title in the first field
4) Click Upload or Select from Photo Album to add photos
5) Click Post
6) Once posted, the album will be created as a “Topic” on the albums page for the public to see. The topic title will be the “Photo Gallery Title” they created before uploading their photos.

To create this migration path we used vBulletin5’s default album structure. Unfortunately, it won’t work like the “PhotoPlog” but is an album/gallery component on the forum now.
See more
See less

Andiamo 70 Curing

  • Filter
  • Time
  • Show
Clear All
new posts

  • Andiamo 70 Curing


    I've done it! I've ordered my Andiamo 70 wood-fired oven!

    I've been reading the forum and I have some questions about curing the oven.

    - I've read I have to wait one week to start curing the oven. Is that true with the Andiamo as well? Since it's pre-built at Forno Bravo, and there's very little masonry involved, I'm wondering if that rule holds.

    - While curing, do I need to try and sustain the temperature all day? Or is it okay if I hit the required temp for that firing and then stop?

    - After firing the oven, does it have to cool all the way down to ambient temperature before starting the next curing stage?

    Thanks! I can't wait to get the oven!