web analytics
Oven peak temp - Forno Bravo Forum: The Wood-Fired Oven Community


1 of 3 < >

Forum Page Loading Response

Forum Members:

We have received feedback regarding recent issues with page loading response time. We believe the slow response issue stems from the analytics we added with the new Forum. We are in the process of reconfiguring those elements and, after an approximate 24-hour time period for the reconfiguration to run, we anticipate a return to normal page load times. Thank you for your patience!
2 of 3 < >


Hello, Forno Bravo Community Forum members.

As many may have noticed already, the Community Forum site was briefly down today. While working on scheduled routine maintenance, we encountered an error when trying to add a software update. As the site is now back up and running, some of you may notice that some recent data has been misplaced from November 10th up to today. We are currently working on resolving the issue. The forum has full operational capabilities and we encourage all forum members to continue actively posting in the threads.

We apologize for any inconvenience that this issue may have caused you. The Forno Bravo family values each and every member of our community. If you have any issues or concerns, please feel free to let us know on our issues thread here:


Thank you for understanding.
3 of 3 < >

Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

Oven peak temp

  • Filter
  • Time
  • Show
Clear All
new posts

  • Oven peak temp

    OK, finally ready to fire cure the oven....I read 200 degrees peak temp for first fire...is that A. the temp of the oven dome, B. the fire itself or C the general oven?

    Thanks...just don't want more crack than I already have...

  • #2
    Re: Oven peak temp

    I didn't go through this process, but I would think it's the dome. Paper ignites at Fahrenheit 451 (great movie) so it obviously isn't the fire. If you get the dome to the temp, the rest of your build should cure quite slowly.

    Check out my pictures here:

    If at first you don't succeed... Skydiving isn't for you.


    • #3
      Re: Oven peak temp

      Most likely C - general oven temperature...or D. Floor Temp. But can't really tell without a few more details, such as type of thermometer, thermometer placement (in the oven) and any other details you can add. A picture would be very helpful.
      Our Facebook Page:http://www.facebook.com/pages/Stoneh...60738907277443


      • #4
        Re: Oven peak temp

        In my opinion the temperature is only a rough guide. The point is to be gentle with the first fires and to make fires gradually more robust. Don't get too hung up on precision.

        Good luck!