web analytics
Insulated weber charcoal grill - Forno Bravo Forum: The Wood-Fired Oven Community



Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

Insulated weber charcoal grill

  • Filter
  • Time
  • Show
Clear All
new posts

  • Insulated weber charcoal grill

    Why couldn't you use the same insulating blanketsthat we buy for the wood fired pizza ovens, and mold them around the classic weber charcoal grill, somehow building a small chimney maybe. Wouldn't that give you some kind of cooking advantage for direct or even indirect cooking?

  • #2
    Re: Insulated weber charcoal grill

    You find a basic design trial here


    and in there another link to modified webers.

    I thought about using insulation, but the basic problem is mass. Insultation would speed up the initial heating but I do no think it would help much with cooking. A brick oven is a huge amount of mass compared a weber. The experience of the weber modders etal is that you need a contant source of heat. There is just not enough mass to sustain the heat transfer at pizza temperatures. If you read the thread on heat management for the ovens you will find that that they have to move the fire from side to side to keep enough heat for pizza cooking. With a small mass set up ( ie WEBER), you just have to keep adding heat.

    I have not yet used any of the insulating blankets. We have them at the plant where I work. The type we use have a cover on them so that you will not come into contact with the insulator ( Kaowool). I suppose you could wrap one around your set up but it would seem to be like teaching the pig to dance.
    It wastes your time, annoys the pig and in the end, it is still ugly.

    For the cost and effort, I would rather spend money on building a real pizza oven.

    Just my 0.04 ( inflation adjusted)

    Last edited by brokencookie; 07-30-2008, 07:14 PM. Reason: large fingers, small buttons
    Sharpei Diem.....Seize the wrinkle dog