web analytics
Seat Wall & Counter Construction - Forno Bravo Forum: The Wood-Fired Oven Community



Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

Seat Wall & Counter Construction

  • Filter
  • Time
  • Show
Clear All
new posts

  • Seat Wall & Counter Construction

    What CMU blocks should I be looking at to use to construct a seating wall? The stone tops I am considering come in 12" or 14" depth typical of stair treads. An 8" thick block seems like their will be too much overhang. The tile siding will take up about 1/2" on each side. The 14" top probably makes for a better seat area.

    I will also be using CMUs for the countertop. What size CMUs are best to build up the counter and what is the recommended height? Should I leave open areas underneath or block it all in?

  • #2
    Re: Seat Wall & Counter Construction

    I'm not sure about MA, but in FL, we have standard sizes of 8", 12" and 16" CMU's. The 12" block is actually 11-5/8" wide x7-5/8" height x15-5/8" length. Obviously, you would lay these blocks so that the wall would be 12" thick. You can also get 10" wide blocks if you are considering using 12" caps.
    My WFO project: http://picasaweb.google.com/stevprin/WFOSmallPhotos#


    • #3
      Re: Seat Wall & Counter Construction

      I used 12x12 caps on my raised garden bed, with walls made from 8x8x816 plus veneer, and it makes great overflow seating.

      However, if I were building an actual seating wall, I'd want the bench to be deeper. Standard around here seems to be using 8x8x16 blocks and making the bench 16" deep.

      Like this, from when we had professionals build a courtyard at our old house: