web analytics
building Forno Bravo Calore 2G series fireplace - Forno Bravo Forum: The Wood-Fired Oven Community



Photo Galleries are back! Instructions below.

Dear forum users,
Thank you for your patience with the Photo galleries. We've got your galleries online!
We have finished writing a custom script to migrate the PhotoPlog to vBulletin5’s albums.

Unfortunately V-Bulletin killed the "Photoplogs" in their software upgrade which was unforeseen and we're the first development group to have written a script for getting the galleries back... that said, it took some time to reverse engineer the code and get the albums to move over seamlessly!

Forum users will be able to access their “PhotoPlog” images through their user profile page by clicking on the “Media” tab.
They will also be able to browse other albums by going to the albums page. (On the forum site, there is a link in the black bar beside “Forums” to the albums.)

In order for users to create an album please follow the steps below.
1) Go to user profile page and click “Media”
2) Click Add Photos
3) Enter Photo Gallery Title in the first field
4) Click Upload or Select from Photo Album to add photos
5) Click Post
6) Once posted, the album will be created as a “Topic” on the albums page for the public to see. The topic title will be the “Photo Gallery Title” they created before uploading their photos.

To create this migration path we used vBulletin5’s default album structure. Unfortunately, it won’t work like the “PhotoPlog” but is an album/gallery component on the forum now.
See more
See less

building Forno Bravo Calore 2G series fireplace

  • Filter
  • Time
  • Show
Clear All
new posts

  • building Forno Bravo Calore 2G series fireplace

    Hi, I've been scouring this forum for others that have built this outdoor fireplace.
    and I'm starting to feel like I am the first.
    I received one today and have a few question. The refractured concrete pieces seem to be coated in a slimy substance, and it seemed like something that might cause bonding problems. I'm thinking that it is some kind of form release goop.
    I took a little soapy water and started scrubbing a few pieces. I realize it was still leaving a greasy coating but taking away some of the goopynes. the web site and or installation instructions do not say anything about this. I am all ready to install this. but I'm a bit freaked out about this. I would hate to spend the mega hours to install this to find out later that nothing was bonded by the mortar. If you have any info about this, help would be greatly appreciated.
    Thank you