web analytics
Fireplace in my extended vent landing area - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse

I'm Peter Reinhart! Ask Me Anything! Monday, February 15, 2016 7:00-8:00 pm EST

To kick off our AMA feature, we have invited author, chef and master bread maker and host of Pizza Quest, Peter Reinhart, to be our first host! Peter will be in the Forum on Monday, February 15th, from 7:00 - 8:00 pm EST. If you are unable to be online during the live session, you can post your questions in the sticky post. Peter will answer those questions during the live session on February 15th. You can view Peter's answers to your questions as well as what happened during the live session in the session thread.

Ask Me Anything New Forum Feature

You will notice a new forum at the top of the main page called, "Ask Me Anything". This forum will be used for live one hour "Ask Me Anything" (AMA) sessions hosted by people who are knowledgeable in different areas pertaining to wood fired ovens. How it works:
- Each AMA will have a "sticky" thread where the community can post questions they would like answered during the live session. This will allow everyone to participate even if you can't be online for the live session. These questions will not be answered by the host until the live AMA; if you need an answer quickly, you should post it in the appropriate Forum area for the community to respond.
- Another thread will be posted for the live AMA. Registered users who are logged in during the live session can interact with the host by asking questions and receiving responses.
- The live thread will remain in the AMA forum to view after the session.

We hope you enjoy this new feature! Please let us know if there is a topic that you'd like to have as an AMA and we'll look for a host!

Forno Bravo
See more
See less

Fireplace in my extended vent landing area

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Fireplace in my extended vent landing area

    I had to extend my vent landing area to 21 deep to account for a number of planning flaws. Since my inner arch is only 10 1/2 high ( I forgot about the 2 inch shiplap fire tiles I used for the oven floor), I wanted a flared vent landing to be able to comfortably work the oven, so I am 35 in wide from inside of outer arch to inside. Now, I believe that if I had a stainless steel door to cover the inner arch, that I could use the vent landing as a fireplace when I wished. I am currently thinking about my vent floor. Since I have a 1/4 inch heat break all around the arch and floor, stuffed with insblock 19. I could use a real pretty granite or stone of some kind or... use the same 12x12x2 shiplap tiles (fire) for the vent landing floor, AND, use it as a fireplace (no damper needed). For all I know, it may accidently be very "Rumford". What say you all?

    Tom

  • #2
    Re: Fireplace in my extended vent landing area

    You don't need to block off your oven to use it as a fireplace. Just rake the fire forward after it's going well, and the same flue gas dynamics that makes your oven burn clean and hot will work up front, as well.
    My geodesic oven project: part 1, part 2

    Comment


    • #3
      Re: Fireplace in my extended vent landing area

      And that is the solution to the fireplace/oven combo conundrum.

      Comment

      Working...
      X