If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Forno Bravo Forum Thread Message
Hello, Forno Bravo Community Forum Members!
The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.
Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.
We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.
Thank you for all of your patience and continued support.
Your oven look amazing, you should be proud. I do agree with David though in regards to the insulation under the floor. If you havenít insulated the floor you could always lift the floor up, (thatís if the solider course isnít sitting on top of the oven floor which it doesnít seem to be) and put some insulation board under the floor. It will raise the hight of the floor and you will still have the soliderís directly on concrete but it will be better then nothing. It will also put out the dome hight to opening height ratio which is usually about 63%.
Lot of work but look how much work you have put into it already. One more thing, I donít know if that kind of heat will degrade the structural slab underneath over time. I will leave that to someone who knows about concrete to answer that.