web analytics
Casting my first oven. Help - Forno Bravo Forum: The Wood-Fired Oven Community



Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

Casting my first oven. Help

  • Filter
  • Time
  • Show
Clear All
new posts

  • Casting my first oven. Help

    I am in the process of casting the dome of my oven i am in the UK and see that there are various products available i guess castable 1400 (Refactory cement) is what i need but does it need reinforcement such as fibre added to reduce cracking. also i have read on the net that it is not such a good idea to cast in one so should i cut the dome into 2 or 4 segments after it has cured then cement back together. (I guess this will work as an expansion joint) Any ideas on this project will be greatly appreciated. Thankyou