web analytics
ideal caulk material for inside flue - Forno Bravo Forum: The Wood-Fired Oven Community



Photo Galleries are back! Instructions below.

Dear forum users,
Thank you for your patience with the Photo galleries. We've got your galleries online!
We have finished writing a custom script to migrate the PhotoPlog to vBulletin5’s albums.

Unfortunately V-Bulletin killed the "Photoplogs" in their software upgrade which was unforeseen and we're the first development group to have written a script for getting the galleries back... that said, it took some time to reverse engineer the code and get the albums to move over seamlessly!

Forum users will be able to access their “PhotoPlog” images through their user profile page by clicking on the “Media” tab.
They will also be able to browse other albums by going to the albums page. (On the forum site, there is a link in the black bar beside “Forums” to the albums.)

In order for users to create an album please follow the steps below.
1) Go to user profile page and click “Media”
2) Click Add Photos
3) Enter Photo Gallery Title in the first field
4) Click Upload or Select from Photo Album to add photos
5) Click Post
6) Once posted, the album will be created as a “Topic” on the albums page for the public to see. The topic title will be the “Photo Gallery Title” they created before uploading their photos.

To create this migration path we used vBulletin5’s default album structure. Unfortunately, it won’t work like the “PhotoPlog” but is an album/gallery component on the forum now.
See more
See less

ideal caulk material for inside flue

  • Filter
  • Time
  • Show
Clear All
new posts

  • ideal caulk material for inside flue

    I am looking for the best material to fill some small gaps inside my ovens flue, where the entry tunnel joins onto the dome.

    Part of my flue is made up of a really tight firebrick arch with a filler made up of firebrick dust, sharp sand and cement which has set perfectly, but seems to heve shrunk slightly leaving a gap. I looked at the high temp silicone but its only rated to 350 C. I could use some of the firebrick dust and cement although I think that wont work as its too gritty for the gaps.

    any ideas?


  • #2
    Re: ideal caulk material for inside flue

    hi brad,
    Refractory Mortar, Sealant 3200 degree 11 oz. tube - eBay (item 130281708457 end time Apr-15-09 15:05:32 PDT) paste this in your browser. It is an ebay item for 3200 degree caulking, it comes from an ebayer name High Temp Refractory Store. Its about 20.00 an 11 oz. tube with shipping,, Good luck, Mark