web analytics
how careful should i be about filling gaps in mortar? - Forno Bravo Forum: The Wood-Fired Oven Community


1 of 3 < >

Forum Page Loading Response

Forum Members:

We have received feedback regarding recent issues with page loading response time. We believe the slow response issue stems from the analytics we added with the new Forum. We are in the process of reconfiguring those elements and, after an approximate 24-hour time period for the reconfiguration to run, we anticipate a return to normal page load times. Thank you for your patience!
2 of 3 < >


Hello, Forno Bravo Community Forum members.

As many may have noticed already, the Community Forum site was briefly down today. While working on scheduled routine maintenance, we encountered an error when trying to add a software update. As the site is now back up and running, some of you may notice that some recent data has been misplaced from November 10th up to today. We are currently working on resolving the issue. The forum has full operational capabilities and we encourage all forum members to continue actively posting in the threads.

We apologize for any inconvenience that this issue may have caused you. The Forno Bravo family values each and every member of our community. If you have any issues or concerns, please feel free to let us know on our issues thread here:


Thank you for understanding.
3 of 3 < >

Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

how careful should i be about filling gaps in mortar?

  • Filter
  • Time
  • Show
Clear All
new posts

  • how careful should i be about filling gaps in mortar?

    I've got my first two chains of bricks laid and mortared, and as I start my third I am worried about how careful I should be to fill the joints between two bricks on one chain and the layer above. I imagine that air pockets in the mortar are generally bad and could lead to blow-outs. Is this a danger? Should I be worried if there are any small air bubbles in my joints? I have absolutely no brick-laying experience, so any advice or reassurance will be appreciated.
    my work in progress:

  • #2
    Re: how careful should i be about filling gaps in mortar?

    I would think that filling in the gaps is important. What I did was when the dome was finished I made a grout bag out of a quart size freezer bag and went in and filled anything that needed grout. Hope this helps.



    • #3
      Re: how careful should i be about filling gaps in mortar?

      I used the expensive refractory mortar to stick the bricks together for the dome, but didn't worry about filling in the gaps in the exterior. I did try to make sure there were no gaps visible in the interior of the dome. Then, like Mark, I filled in the gaps outside so I had a solid dome. I used an actual large disposable pastry bag, though. Very, very handy things!


      • #4
        Re: how careful should i be about filling gaps in mortar?

        I would try to fill them as best as you can. Your interior joints look really nice.

        Some people have used a "pastry-bag" method to squirt mortar in the cracks on the exterior after the bricks are laid.

        Show us some pictures of the exterior part of the dome so we can better understand what you are talking about.
        Ken H. - Kentucky
        42" Pompeii

        Pompeii Oven Construction Video Updated!

        Oven Thread ... Enclosure Thread
        Cost Spreadsheet ... Picasa Web Album


        • #5
          Re: how careful should i be about filling gaps in mortar?

          Firebricks are pretty porous. I don't think an air bubble is going to spall your dome. Fill it the best you can, but don't loose sleep over it.
          My geodesic oven project: part 1, part 2


          • #6
            Re: how careful should i be about filling gaps in mortar?

            Great! Thanks for the replies. I'll keep plugging away at the dome, filling as well as I can, and backfill from the outside as suggested with a pastry bag. Good to know any small gaps or air bubbles shouldn't bring the whole thing down.
            I'll take some pictures of the gaps tomorrow, but your replies have calmed my jitters! Meanwhile, I finished the third row tonight, and started the opening. Will post pictures in the photo section.
            Thanks again!
            my work in progress: