web analytics
Refmix questions - Forno Bravo Forum: The Wood-Fired Oven Community



Photo Galleries are back! Instructions below.

Dear forum users,
Thank you for your patience with the Photo galleries. We've got your galleries online!
We have finished writing a custom script to migrate the PhotoPlog to vBulletin5’s albums.

Unfortunately V-Bulletin killed the "Photoplogs" in their software upgrade which was unforeseen and we're the first development group to have written a script for getting the galleries back... that said, it took some time to reverse engineer the code and get the albums to move over seamlessly!

Forum users will be able to access their “PhotoPlog” images through their user profile page by clicking on the “Media” tab.
They will also be able to browse other albums by going to the albums page. (On the forum site, there is a link in the black bar beside “Forums” to the albums.)

In order for users to create an album please follow the steps below.
1) Go to user profile page and click “Media”
2) Click Add Photos
3) Enter Photo Gallery Title in the first field
4) Click Upload or Select from Photo Album to add photos
5) Click Post
6) Once posted, the album will be created as a “Topic” on the albums page for the public to see. The topic title will be the “Photo Gallery Title” they created before uploading their photos.

To create this migration path we used vBulletin5’s default album structure. Unfortunately, it won’t work like the “PhotoPlog” but is an album/gallery component on the forum now.
See more
See less

Refmix questions

  • Filter
  • Time
  • Show
Clear All
new posts

  • Refmix questions

    Hi, I purchased the Casa 90, my stand is done, will be putting the FB board down shortly. Done a lot of reading / searching on the forum, read through the instructions, I still have a few Refmix questions / clarifications:

    1. I read one post on using refmix on top of FB board. It seems that I should do the following:
    - Definitely use the refmix on top of the FB board
    - Wet the FB board before I put down the refmix (even though it will be absorbed)
    - Follow the directions in the spec sheet for mixing (I think it say 2.5 liters per bag)
    Is this correct? Do I need to add sugar or anything to slow down the setting (per one post)?

    2. I have 4 bags of the refmix and am wondering about the coverage / bag. If I am only going to lay the floor pieces ... how much should I mix for this first iteration?

    3. When I set the dome in place, do I need to put refmix on the FB board to set the dome on?

    4. It looks like in all cases (floor, dome, vent, chimney base), no refmix should go in between any component, but all joints (including the dome base and FB board), should get a band of refmix. Any issues here?

    Thanks for the help
    Raleigh, NC