web analytics
Tiles expansion - Forno Bravo Forum: The Wood-Fired Oven Community



Photo Galleries are back! Instructions below.

Dear forum users,
Thank you for your patience with the Photo galleries. We've got your galleries online!
We have finished writing a custom script to migrate the PhotoPlog to vBulletin5’s albums.

Unfortunately V-Bulletin killed the "Photoplogs" in their software upgrade which was unforeseen and we're the first development group to have written a script for getting the galleries back... that said, it took some time to reverse engineer the code and get the albums to move over seamlessly!

Forum users will be able to access their “PhotoPlog” images through their user profile page by clicking on the “Media” tab.
They will also be able to browse other albums by going to the albums page. (On the forum site, there is a link in the black bar beside “Forums” to the albums.)

In order for users to create an album please follow the steps below.
1) Go to user profile page and click “Media”
2) Click Add Photos
3) Enter Photo Gallery Title in the first field
4) Click Upload or Select from Photo Album to add photos
5) Click Post
6) Once posted, the album will be created as a “Topic” on the albums page for the public to see. The topic title will be the “Photo Gallery Title” they created before uploading their photos.

To create this migration path we used vBulletin5’s default album structure. Unfortunately, it won’t work like the “PhotoPlog” but is an album/gallery component on the forum now.
See more
See less

Tiles expansion

  • Filter
  • Time
  • Show
Clear All
new posts

  • Tiles expansion


    I am new at the forum. I submitted a question to Forno Bravo on their web site and received a reply (I think it was automatic) that I should use the forum where a lot of experienced people discussed related issues. My question was:
    I am starting the buiding of a 36" pizzaoven and using the Forno Bravo drawingsand descriptions (Pompeii Oven Plans). The fire bricks i am using have an expansion of 0.65% (at 1000 C). The instructions recommend to set the floor tiles in a paste of sand and fireclay. I am worried that this may restrict the expansion of the tiles (calculated expansion is about 8 mm over the floor lenght). Can you comment on this issue? I am using the oven mouth as the fixed point. Am i assuming right when i conclude that the first round of wall bricks, which sits on the floor itself, should not stick to the floor itself? kind regards from karl
    Do you have any input or advice on this issue.

    Regards from karl

  • #2
    Re: Tiles expansion

    I too am a real novice at this oven building, but I do know that if you convert 1000 degrees Centigrade you are talking about 1832 degrees Fahrenheit. Way above I am told where i will be cooking (400- 800 degrees F). Not sure how much expansion you will actually experience at that level. I am interested to know about whether or not mortar is used on the bottom of the first course or not. My contractor will be doing it tomorrow.
    Good luck with your oven.
    Jim Bob


    • #3
      Re: Tiles expansion

      You are right. I used the expansion number on the data sheet and as you say it is stated at a much higher temperature. I guess a more realistic temperature would be 2/3 of this. Maybe the expansion is linear with temperature in that range? If so about 5 mm max linear expansion across the 36" floor should be expected?
      I would love to hear what your contractos say about using mortar on the first course.

      regards from karl


      • #4
        Re: Tiles expansion

        Those FB specs are handy but of course impossible I guess to cover all contingencies. But somewhere, perhaps in this forum I have read about the mortar situation. I just cannot find it now that I really need to know. Unfortunately I cannot leave it entirely up to my hispanic brick mason. He has only built one or two of these type ovens. He does a lot of fireplaces, and is a very good mason, but they don't deal with the same sustained high temps we are talking about here. Even when I know the right answer I still have some difficulties communicating that info to him. His English is minimal and my Spanish is non existent! I know, I need an interpreter!

        Jim Bob


        • #5
          Re: Tiles expansion

          I can't seem to find any data sheets for firebrick that include thermal expansion coefficients, but for alumina it's 5.4x10-6 per Kelvin. If we assume (dangerous, I know!) that firebrick is about the same, then an increase of 500C would cause an expansion of roughly 0.3%.

          That's only a couple hundredths of an inch per brick, so I wouldn't worry about it. Besides, there have been a lot of successful builds from these plans!


          • #6
            Re: Tiles expansion

            I'm new to the group and have not started building my own WFO yet, but have heard that mortar is not used on the bottom of the first course. The bricks should only rest on the oven surface.

            But as I mentioned above I'm new to this and am not a brick mason...just trying to gather as much info prior to starting.

            If I'm incorrect hopefully someone else will correct me.


            • #7
              Re: Tiles expansion

              Karl, Jim Bob,

              I to am a novice to building ovens. I finished my first and only oven about six months ago, and so far it is still standing and even better still cooking. I was a visitor to this sight long before I decided to do my build and read over many of the threads here and the Pompeii plans until I could probably recite them backwards. Anyway what I took away from all of this is that the bottom layer of fireclay, sand and water will make a nice paste for the floor bricks to set on and since there is no cement the mix will not set hard but remain as a sand type layer. Like laying patio bricks, it helps you set the bricks so they are nice and flat with each other and no edges sticking up to catch your peel on.

              Jim Bob,

              From most of my readings do not cement the first (soldier) course to the floor bricks. This will allow horizontal expansion across the floor without stressing the wall to floor interface.

              I am just a novice at this so it may be wise to research more yourselves or wait for a professionals reply. There are many here at this sight that will give you better insight to your questions but I believe the answers will basically be the same as mine only more informative. Hope this helps.



              • #8
                Re: Tiles expansion

                Not sure how you had the patience to read thru this forum day after day and not get right into building one of these ovens!! But obviously that is the smart way to go and you don't end up asking a lot probably silly questions. It is risky to learn as you go, if you don't learn fast enough. That is my case. But I think things will turn out fine and we are starting on the oven floor as we speak. Had to drill holes first for the thermocouple leads to the thermometer first. I will be fighting the styrofoam forms next, trying to cut them perfectly to size of the inside of the oven. It doesn't look like Rocket Science, but I still can screw it up!!
                Jim Bob


                • #9
                  Re: Tiles expansion

                  I agree with John. I'm following the FornoBravo plans and getting ready to start my floor and dome this weekend. I'm making a paste out of fire clay (also called mortar clay) fine sand and water. Spreading it with a notched trowel so the floor bricks (in a herringbone pattern) can be seated level. Just follow the FB plans...these guys are experts. Build it to their specs and your oven will live a lot longer than you will!

                  Check out my oven progress here: http://www.fornobravo.com/forum/phot...dex.php?u=4147

                  See ALL of my pictures here: