web analytics
Mortar the Vee ? - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse

Photo Galleries are back! Instructions below.

Dear forum users,
Thank you for your patience with the Photo galleries. We've got your galleries online!
We have finished writing a custom script to migrate the PhotoPlog to vBulletin5’s albums.

Unfortunately V-Bulletin killed the "Photoplogs" in their software upgrade which was unforeseen and we're the first development group to have written a script for getting the galleries back... that said, it took some time to reverse engineer the code and get the albums to move over seamlessly!

Forum users will be able to access their “PhotoPlog” images through their user profile page by clicking on the “Media” tab.
They will also be able to browse other albums by going to the albums page. (On the forum site, there is a link in the black bar beside “Forums” to the albums.)

In order for users to create an album please follow the steps below.
1) Go to user profile page and click “Media”
2) Click Add Photos
3) Enter Photo Gallery Title in the first field
4) Click Upload or Select from Photo Album to add photos
5) Click Post
6) Once posted, the album will be created as a “Topic” on the albums page for the public to see. The topic title will be the “Photo Gallery Title” they created before uploading their photos.


To create this migration path we used vBulletin5’s default album structure. Unfortunately, it won’t work like the “PhotoPlog” but is an album/gallery component on the forum now.
See more
See less

Mortar the Vee ?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Mortar the Vee ?

    Inside my dome, my bricks have a slight Vee, at most 1/8 inch. for the most part with the tools and suggestions from the posts listed on the site, I have been able to eliminate alot of the gaps and have a tight fit between bricks. With the bricks that have the gap on the inside, should I pack mortar in the gap or leave them alone?

    Thank you.
    Checker

  • #2
    Re: Mortar the Vee ?

    I don't understand.... aren't you putting mortar on the bricks as you lay them? Or are you building a 'dry' oven with very tight joints (as has been done by an expert on this forum!)

    if you are mortaring the bricks, which is 'normal', then even with tight joints some of it should be in the VEE. Or am I misunderstanding?

    But i think the answer is yes - you want refractory mortar in the gaps.

    Neil

    Comment


    • #3
      Re: Mortar the Vee ?

      I think you don't need to add any mortar, as long as the bricks are held firmly at the bottom already. Any mortar additions in the "vee" or other gaps are purely cosmetic - and likely to fall out with heat cycling anyway.
      My build progress
      My WFO Journal on Facebook
      My dome spreadsheet calculator

      Comment


      • #4
        Re: Mortar the Vee ?

        Originally posted by boerwarrior View Post
        Or are you building a 'dry' oven with very tight joints (as has been done by an expert on this forum!)

        Could you refer to the expert by name or build?
        Why is this thus? What is the reason for this thusness?
        I forgot who said that.

        Comment


        • #5
          Re: Mortar the Vee ?

          I think that's Les' build he's referring to.

          It's a fine build - but I don't think you need to worry about going to that extent. The mortar holds the bricks apart, it doesn't stick them together. As long as you have mortared the wedges at the back and sides (where the gap is greatest), gravity will keep your oven together just fine.
          My build progress
          My WFO Journal on Facebook
          My dome spreadsheet calculator

          Comment


          • #6
            Re: Mortar the Vee ?

            I should have been more descriptive with my thread, my apologies. DeeJayoh understood me correctly. The mortar is placed underneath and on the sides, but apparantly its not coming out, oozing,all the way up front, trying to keep is clean as possible. I worried that if the mortar wasn't flush to the inside, that it would pose a problem.
            Thank you for all the replies!
            Checker

            Comment


            • #7
              Re: Mortar the Vee ?

              Originally posted by checker1965 View Post
              Inside my dome, my bricks have a slight Vee, at most 1/8 inch. for the most part with the tools and suggestions from the posts listed on the site, I have been able to eliminate alot of the gaps and have a tight fit between bricks. With the bricks that have the gap on the inside, should I pack mortar in the gap or leave them alone?

              Thank you.
              Checker
              In my opinion, as a first time oven builder, I would fill them when you can. However, I dampen the areas first to have any hope of having the mortar adhere for good. I don't think it makes a huge difference in the functionality of the oven and is probably more cosmetic than anything. I personally dampen a few bricks, then pack some in, making sure it's wet enough to actually go in and bond to the brick. If the mortar is too dry and/or you don't dampen the bricks, it's probably not worth your time. That's just my way of doing it. Hope your oven build is going good for you.
              My Build:
              http://www.fornobravo.com/forum/f8/s...ina-20363.html

              Always go the extra mile. It's never crowded.

              Comment


              • #8
                Re: Mortar the Vee ?

                Thanks for the advice, NCMan. The build is going well. I'm at the point of laying course six, wondering how the bricks stay up after the angle is going to get steeper... I've seen the wood supports people use to help hold the bricks up, hopefully that will do the job.
                I'm trying to visualize the vent right now and how to install it. Time to review and look at previous posts from successful builders. Hope your build is going well too.
                Checker

                Comment


                • #9
                  Re: Mortar the Vee ?

                  Gudday
                  Funny this should come up. When I constructed my dome my understanding that brick to brick contact on the front face of the brickwork was what you wanted to achieve. The mortar on the sides and back just keep the brick in correct orientation . I built to a ply guide with brick bulster and grinder. Have quite a few V gapes. It functions alright and I've often thought to crawl inside and repoint the gapes but to date really it's not been that important.
                  Sorry I'm holidaying so I have no pics
                  Regards dave
                  Measure twice
                  Cut once
                  Fit in position with largest hammer

                  My Build
                  http://www.fornobravo.com/forum/f51/...ild-14444.html
                  My Door
                  http://www.fornobravo.com/forum/f28/...ock-17190.html

                  Comment


                  • #10
                    Re: Mortar the Vee ?

                    G'day

                    Name:  84c0b6f240588a2412c268873358ff24.jpg
Views: 1
Size:  1,012.9 KB

                    Found a pic not pretty but quite functional even 4 years down the track

                    Regards dave
                    Measure twice
                    Cut once
                    Fit in position with largest hammer

                    My Build
                    http://www.fornobravo.com/forum/f51/...ild-14444.html
                    My Door
                    http://www.fornobravo.com/forum/f28/...ock-17190.html

                    Comment


                    • #11
                      Re: Mortar the Vee ?

                      Thanks Dave. I read your build link, great looking oven! Thanks for the picture. I should be ok then.
                      Checker

                      Comment

                      Working...
                      X