web analytics
Testing mortar - Forno Bravo Forum: The Wood-Fired Oven Community



Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

Testing mortar

  • Filter
  • Time
  • Show
Clear All
new posts

  • Testing mortar

    I have bags of alsey flue set mortar (#100316) that have been setting for about two years in a dry shed. Is there a good test procedure for testing the mortar to assure that it is still "good to use." Temps here are in the 70's and it just seems that it is taking a long time for the mortar to set. Not sure as to whether there may be a problem or not.

    Also should I spray the dome with water as I am building, or just leave the mortar set? Thanks for any help.

  • #2
    Re: Testing mortar

    I don't know that product, but it is probably a calcium aluminate based one which have shorter shelf life (usually 12. Months) if it were mine I'd ere on the safe side and ditch it, but you could try mixing a sample and see what happens.
    Kindled with zeal and fired with passion.


    • #3
      Re: Testing mortar

      It is a Hygroscopic material, so unless it was kept in an airtight container, it has already fired off, although at a microscopic level. It may react a little with the addition of water, but it does have a shelf life and yours has probably exceeded it.

      Mix some, make a 1x1x6 inch cube and let it cure for a week. If you can break it between your fingers, discard it.


      • #4
        Re: Testing mortar

        Thanks for the input. This stuff is 3 years old! I did mix a sample in a small plastic bottle and it set up pretty quickly. I will leave it for a week as suggested.
        In the meanwhile, I contacted Alsey in St. Louis and spoke to their tech department. Was told that as long as the flue set hadn't hardened in the bags and was flowing smoothly, there should be no problems. According to the tech, flue set doesn't have a shelf life problem as long as it has not been exposed to wet conditions. The tech also said that the material takes a week to ten days to harden and cautioned against retempering the material with additional water.

        Feel free to add additional comments and thank you for the help. I'm just getting started so expert help is appreciated.................Jinxy.


        • #5
          Re: Testing mortar

          He is technically correct, there is no shelf life if it is not exposed to moisture.


          • #6
            Re: Testing mortar

            Originally posted by jinxy View Post
            ...snip... Feel free to add additional comments and thank you for the help. I'm just getting started so expert help is appreciated.................Jinxy.
            You are not going to get advice anywhere that is better than the advice you get from David s and Tscarborough.
            Lee B.
            DFW area, Texas, USA

            If you are thinking about building a brick oven, my advice is Here.
            Our One Meter Pompeii Oven album is here.
            An album showing our Thermal Breaks is Here.

            I try to learn from my mistakes, and from yours when you give me a heads up.