web analytics
Newbie Hearth Question - Forno Bravo Forum: The Wood-Fired Oven Community


1 of 2 < >


Hello, Forno Bravo Community Forum members.

As many may have noticed already, the Community Forum site was briefly down today. While working on scheduled routine maintenance, we encountered an error when trying to add a software update. As the site is now back up and running, some of you may notice that some recent data has been misplaced from November 10th up to today. We are currently working on resolving the issue. The forum has full operational capabilities and we encourage all forum members to continue actively posting in the threads.

We apologize for any inconvenience that this issue may have caused you. The Forno Bravo family values each and every member of our community. If you have any issues or concerns, please feel free to let us know on our issues thread here:


Thank you for understanding.
2 of 2 < >

Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

Newbie Hearth Question

  • Filter
  • Time
  • Show
Clear All
new posts

  • Newbie Hearth Question

    Lurked for a while and thought I ought to join.
    Our oven project is coming on well. We are trying to keep costs down by using recycled products as much as possible. We are just about to lay the insulated hearth below the fire brick base.
    The question is, to keep costs down, could we use broken glass as ballast mixed in with the vermiculite/cement mix? Would that work for insulation?
    Thanks in anticipation.

  • #2
    Re: Newbie Hearth Question

    Hi SB,

    I remember seeing a video once of a guy using glass under his floor but I reckon he used it for heating purposes rather than insulation.
    Not sure how it would work but the way I think about it is this.:

    if you had a handful of glass and there was a fire on the top of it surely it wouldn't be long before you began to feel the heat, therefor that means to me that it would not be a good insulator to mix with the vermiculite.
    I have heard of whole bottles being used as an insulator in pig stys for instance under the floor.
    Your aim is to keep cost down but it is my understanding vermiculite is cheap.
    Just my thoughts SB good luck.


    • #3
      Re: Newbie Hearth Question

      Most insulators work by trapping air, a poor conductor of heat. Bits of glass won't do it. Vermiculite, or perlite, has air pockets in it.
      Can you get scoria, or pumice? Lots of air bubbles trapped in the volcanic rock.
      Off-cuts of Aerated Autoclaved Concrete (AAC) from a building site, maybe?