web analytics
Vermiculite questions - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse

New Forno Bravo Forum Feature

Forno Bravo Forum Community,

You will notice a new forum at the top of the main page called, "Ask Me Anything". This forum will be used for live one hour "Ask Me Anything" (AMA) sessions hosted by people who are knowledgeable in different areas pertaining to wood fired ovens. How it works:
- Each AMA will have a "sticky" thread where the community can post questions they would like answered during the live session. This will allow everyone to participate even if you can't be online for the live session. These questions will not be answered by the host until the live AMA; if you need an answer quickly, you should post it in the appropriate Forum area for the community to respond.
- Another thread will be posted for the live AMA. Registered users who are logged in during the live session can interact with the host by asking questions and receiving responses.
- The live thread will remain in the AMA forum to view after the session.

To kick off our AMA feature, we have invited author, chef and master bread maker and host of Pizza Quest, Peter Reinhart, to be our first host! Peter will be in the Forum on Monday, February 15th, from 7:00 - 8:00 pm EST. If you are unable to be online during the live session, you can post your questions in the sticky post. Peter will answer those questions during the live session on February 15th. You can view Peter's answers to your questions as well as what happened during the live session in the session thread.

We hope you enjoy this new feature! Please let us know if there is a topic that you'd like to have as an AMA and we'll look for a host!

Forno Bravo
See more
See less

Vermiculite questions

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Vermiculite questions

    Apologies if I'm asking questions that have already been answered but I'm unsure about a few points for my hearth insulation. From what ive read it appears that 5:1 or 6:1 by volume is an appropriate vermiculite:concrete mix. I've read comments that I shouldn't use a mixer to do this but I've also read instructions suggesting its ok to use a mixer.
    Also, I think I need to mix dry ingredients then add water, is this correct?
    How much should I tamp or pack it, and how wet should it be?
    Should I simply dump it in and screed the top to level?

    Thanks

    R

  • #2
    Re: Vermiculite questions

    Originally posted by RichC View Post
    Apologies if I'm asking questions that have already been answered but I'm unsure about a few points for my hearth insulation. From what ive read it appears that 5:1 or 6:1 by volume is an appropriate vermiculite:concrete mix. I've read comments that I shouldn't use a mixer to do this but I've also read instructions suggesting its ok to use a mixer.
    Also, I think I need to mix dry ingredients then add water, is this correct?
    How much should I tamp or pack it, and how wet should it be?
    Should I simply dump it in and screed the top to level?

    Thanks

    R
    By all means use a mixer if you wish. I don't because I've found that it tends to stick to the sides of the mixer too much. Also the grains will break down somewhat in a mixer, whereas mixing gently in a barrow less so. Every batch of vermiculite is a bit different and depending on humidity or if the stuff has got wet, but I find for every 10 parts vermiculite you need 3 parts water. If you end up with water pooling in the bottom of the mix then you've added too much.i mix the cement and vermiculite dry first then add the water.the mix will seem too loose and dry so yes tamp it a little, but you don't want to compress it too much or you will lose insulation value.
    Kindled with zeal and fired with passion.

    Comment


    • #3
      Re: Vermiculite questions

      Thanks Dave

      Comment


      • #4
        Re: Vermiculite questions

        Made my first batch of vermicrete today. Not sure at all about the consistency. Made a slurry of about 13litres water to 1/2 bag(12.5kg) cement then mixed this into a 50litre bag of vermiculite in my wheelbarrow. It was very hard to reduce the amount if small balls. The mix also seemed very dry(although these quantities were recommended by the supplier). It's about a 6:1 mix. It was a bit like damp sand when mixed only lighter. Can someone tell me if this is right?
        Thanks

        R

        Comment


        • #5
          Re: Vermiculite questions

          sounds about right to me. Let it dry and check the firmness then. mine was like an old dried up sponge kinda when set. it had some give to finger pressure, but had to press hard. very technical answer, i know. It is strange stuff to work with i remember and i thought at the time this cant be right, but it all is fine once set.

          Texman
          My Progress:
          http://www.fornobravo.com/forum/f8/t...ild-17324.html

          Comment


          • #6
            Re: Vermiculite questions

            Thanks Tex, I just needed to hear it from someone who's done it before

            Comment


            • #7
              Re: Vermiculite questions

              Originally posted by RichC View Post
              Made my first batch of vermicrete today. Not sure at all about the consistency. Made a slurry of about 13litres water to 1/2 bag(12.5kg) cement then mixed this into a 50litre bag of vermiculite in my wheelbarrow. It was very hard to reduce the amount if small balls. The mix also seemed very dry(although these quantities were recommended by the supplier). It's about a 6:1 mix. It was a bit like damp sand when mixed only lighter. Can someone tell me if this is right?
              Thanks

              R
              Sounds like it will work. I like to use 3 parts water for every 10 of vermiculite, which would put yours at just over 16 litres rather than the 13 you used. After 24 hrs you should find it has gone harder. Allow it to dry, but keep rain off it, for a couple of weeks before covering it over with brick. See attach doc on drying vermicrete.
              Attached Files
              Kindled with zeal and fired with passion.

              Comment


              • #8
                Re: Vermiculite questions

                Thanks guys, finished my under heart vermicrete layer. Mixed at about 6:1 and was quite dry using the manufacturers recommendations. About 135mm gone in. I assume it'll have to be much wetter for the dome insulation as the consistency I was working with would never enable me to build up the sides of the dome. Do you guys find you need a much wetter mix for covering the dome?

                Thanks

                Richard

                Comment


                • #9
                  Re: Vermiculite questions

                  I use the same amount of water, but 10:1 vermicrete,cement over the dome. If you add too much water it will pool in the bottom of your barrow and tend to wash the cement off the grains.Apply it in small handfuls, pressing and holding for a couple of seconds. Starting from the bottom of the dome, leaving a little ledge on the top to take the next row.
                  Kindled with zeal and fired with passion.

                  Comment

                  Working...
                  X