web analytics
Getting ready- need some construction advice! - Forno Bravo Forum: The Wood-Fired Oven Community


1 of 2 < >


Hello, Forno Bravo Community Forum members.

As many may have noticed already, the Community Forum site was briefly down today. While working on scheduled routine maintenance, we encountered an error when trying to add a software update. As the site is now back up and running, some of you may notice that some recent data has been misplaced from November 10th up to today. We are currently working on resolving the issue. The forum has full operational capabilities and we encourage all forum members to continue actively posting in the threads.

We apologize for any inconvenience that this issue may have caused you. The Forno Bravo family values each and every member of our community. If you have any issues or concerns, please feel free to let us know on our issues thread here:


Thank you for understanding.
2 of 2 < >

Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

Getting ready- need some construction advice!

  • Filter
  • Time
  • Show
Clear All
new posts

  • Getting ready- need some construction advice!

    Hello! I've been wanting an outdoor brick oven ever since spending some time with the Italians in Iraq- they actually built a brick oven in their camp!

    After talking with the Forno Bravo people, I am planning on the pre-assembled Primavera 70. Then I can just build the base and have the oven set on top.

    So I am getting ready to do this expensive, involved process. I am having a 4' x 12' 6" reinforced cement pad poured tomorrow. It's going to hold the pizza oven on one end, my grill on the other end, and some work space in between. I would really appreciate any advice on my plan.

    After the pad is poured, I am planning to build a simple cinder block frame- focusing on a square for the oven of about 44" inches across (the oven being 42" across). Because of the layout of my patio (about 12" above the ground), I planned to have the frame open at the back to store wood back there.

    As I understand it, I should have rebar in the cement to poke up through the blocks?

    After the frame is made, I need to make a cement top of 3 1/2" reinforced concrete to set the oven on, correct? I can just set the oven on that?

    Considering the weight of this oven, how do you manage to move it off the poles you use to lift it onto the base and onto the correct location on the base without damaging the oven or your back?

    Finally, I am planning to have a bit of roof over the island, so I will need to extend the chimney above that. 1st- will it affect the oven at all to have a non-standard length chimney? 2nd- How can you make the additional length of chimney look like the original terracotta type section?

    Anything else I need to consider?