web analytics
Hello from Maine - Forno Bravo Forum: The Wood-Fired Oven Community


1 of 3 < >

Forum Page Loading Response

Forum Members:

We have received feedback regarding recent issues with page loading response time. We believe the slow response issue stems from the analytics we added with the new Forum. We are in the process of reconfiguring those elements and, after an approximate 24-hour time period for the reconfiguration to run, we anticipate a return to normal page load times. Thank you for your patience!
2 of 3 < >


Hello, Forno Bravo Community Forum members.

As many may have noticed already, the Community Forum site was briefly down today. While working on scheduled routine maintenance, we encountered an error when trying to add a software update. As the site is now back up and running, some of you may notice that some recent data has been misplaced from November 10th up to today. We are currently working on resolving the issue. The forum has full operational capabilities and we encourage all forum members to continue actively posting in the threads.

We apologize for any inconvenience that this issue may have caused you. The Forno Bravo family values each and every member of our community. If you have any issues or concerns, please feel free to let us know on our issues thread here:


Thank you for understanding.
3 of 3 < >

Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

Hello from Maine

  • Filter
  • Time
  • Show
Clear All
new posts

  • Hello from Maine

    Hi folks, my name is Stew and I have been humbled by my efforts to build a brick oven.

    Well, now that the snow has melted and the weather is starting to warm. I (crazily) decided to add a brick oven to my backyard for the family. With limited funds, I decided to put it in myself. I think I must be crazy. I quickly found that I am NOT a stone mason and now have a whole lot of respect for those folks.

    I know now that many here have poured a slab foundation and constructed the C shape block stand with a slab on top. I did not because of concern of cost and lack of know how. Instead I dug down to pure sand (they back filled my yard with sand when they built it) then laid down crushed stone, tamped and dry stacked blocks in a rectangle. I then filled every other hole with rebar and concrete. So now I'm left with this stand that I plan on filling with sand and a layer of insulation (clay and vermiculite).

    Unfortunately the stand is not completely level when you measure it, but it looks pretty good from a distance. I'm going to continue to do the best I can with the pizza oven following plans here and getting advice from forum folks. Wish I had started here but I didn't. Right now I'm shopping around trying to find the lowest cost on firebrick. So far I've found $2 per brick.

    I'll post pics of my block stand as soon as I can figure it out. I have a driving desire to complete this thing.

  • #2
    Re: Hello from Maine

    I would hesitate to build on a dry stack foundation, especially if it is on sand.

    Good luck.


    • #3
      Re: Hello from Maine

      Pizza oven pictures by radiostew - Photobucket

      Here are some pics of my block stand. I was told that sand was very compact and would not heave or move very much. Also, I thought the FB guidelines recommended dry stacking. Could anyone explain? Thanks


      • #4
        Re: Hello from Maine

        Dry stacking and "at least" pouring every other hole is fine by FB standards. However, they do recomend placing it on a concrete slab. Your pics don't resemble dry stacking. They look like the blocks were layed in mortar. However, I don't see a reinforced concrete slab supporting it. My suggestion: Don't go to any further "expense" until you do have a slab to build it on. That may mean disassembling the blocks now instead of the entire oven later.
        Just Say'n
        joe watson

        "A year from now, you will wish that you had started today "

        My Build
        My Picasa Web Album