web analytics
Building in Millbrae Ca - Forno Bravo Forum: The Wood-Fired Oven Community



Photo Galleries are back! Instructions below.

Dear forum users,
Thank you for your patience with the Photo galleries. We've got your galleries online!
We have finished writing a custom script to migrate the PhotoPlog to vBulletin5’s albums.

Unfortunately V-Bulletin killed the "Photoplogs" in their software upgrade which was unforeseen and we're the first development group to have written a script for getting the galleries back... that said, it took some time to reverse engineer the code and get the albums to move over seamlessly!

Forum users will be able to access their “PhotoPlog” images through their user profile page by clicking on the “Media” tab.
They will also be able to browse other albums by going to the albums page. (On the forum site, there is a link in the black bar beside “Forums” to the albums.)

In order for users to create an album please follow the steps below.
1) Go to user profile page and click “Media”
2) Click Add Photos
3) Enter Photo Gallery Title in the first field
4) Click Upload or Select from Photo Album to add photos
5) Click Post
6) Once posted, the album will be created as a “Topic” on the albums page for the public to see. The topic title will be the “Photo Gallery Title” they created before uploading their photos.

To create this migration path we used vBulletin5’s default album structure. Unfortunately, it won’t work like the “PhotoPlog” but is an album/gallery component on the forum now.
See more
See less

Building in Millbrae Ca

  • Filter
  • Time
  • Show
Clear All
new posts

  • Building in Millbrae Ca

    We have started our 42" Pompeii oven in Millbrae. we have the slab built. We used 90lb. sacks of pre-mixed concrete. Rented a small mixer from Home Depot. Mixing and pouring took about four hours. The slab looks really good. We're planning on drilling and epoxying rebar into the slab where the blocks will be filled. This being earthquake territory and all. We also plan to extend the rebar 2" above the top of the last course to tie into the hearth slab and support the rebar for the hearth.

  • #2
    Re: Building in Millbrae Ca

    Jerry, Welcome! Congrats on your start. Post pix as you progress.