web analytics
Hello from Ontario - Forno Bravo Forum: The Wood-Fired Oven Community



Photo Galleries are back! Instructions below.

Dear forum users,
Thank you for your patience with the Photo galleries. We've got your galleries online!
We have finished writing a custom script to migrate the PhotoPlog to vBulletin5’s albums.

Unfortunately V-Bulletin killed the "Photoplogs" in their software upgrade which was unforeseen and we're the first development group to have written a script for getting the galleries back... that said, it took some time to reverse engineer the code and get the albums to move over seamlessly!

Forum users will be able to access their “PhotoPlog” images through their user profile page by clicking on the “Media” tab.
They will also be able to browse other albums by going to the albums page. (On the forum site, there is a link in the black bar beside “Forums” to the albums.)

In order for users to create an album please follow the steps below.
1) Go to user profile page and click “Media”
2) Click Add Photos
3) Enter Photo Gallery Title in the first field
4) Click Upload or Select from Photo Album to add photos
5) Click Post
6) Once posted, the album will be created as a “Topic” on the albums page for the public to see. The topic title will be the “Photo Gallery Title” they created before uploading their photos.

To create this migration path we used vBulletin5’s default album structure. Unfortunately, it won’t work like the “PhotoPlog” but is an album/gallery component on the forum now.
See more
See less

Hello from Ontario

  • Filter
  • Time
  • Show
Clear All
new posts

  • Hello from Ontario

    hi there,
    I'm just about to start the firebrick on my first oven build. I'm definitely worried about all the variables I've been reading about such as not getting hot, not holding heat, cracking etc.
    I have poured 2" of Kast-O-Lite insulated refectory on my hearth slab and intend to lay a firebrick hearth on that. I am toying with the idea of pouring an inch of Unicast-70 refectory cement on top of the firebrick to provide a nice smooth and level surface. Anybody have any experience with that? (I'm worried about it cracking)
    Here's a photo showing the point I'm at. Any suggestions, advice before I continue would be much appreciated.
    Attached Files