web analytics
Professionale 120 special - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse

I'm Peter Reinhart! Ask Me Anything! Monday, February 15, 2016 7:00-8:00 pm EST

To kick off our AMA feature, we have invited author, chef and master bread maker and host of Pizza Quest, Peter Reinhart, to be our first host! Peter will be in the Forum on Monday, February 15th, from 7:00 - 8:00 pm EST. If you are unable to be online during the live session, you can post your questions in the sticky post. Peter will answer those questions during the live session on February 15th. You can view Peter's answers to your questions as well as what happened during the live session in the session thread.

Ask Me Anything New Forum Feature

You will notice a new forum at the top of the main page called, "Ask Me Anything". This forum will be used for live one hour "Ask Me Anything" (AMA) sessions hosted by people who are knowledgeable in different areas pertaining to wood fired ovens. How it works:
- Each AMA will have a "sticky" thread where the community can post questions they would like answered during the live session. This will allow everyone to participate even if you can't be online for the live session. These questions will not be answered by the host until the live AMA; if you need an answer quickly, you should post it in the appropriate Forum area for the community to respond.
- Another thread will be posted for the live AMA. Registered users who are logged in during the live session can interact with the host by asking questions and receiving responses.
- The live thread will remain in the AMA forum to view after the session.

We hope you enjoy this new feature! Please let us know if there is a topic that you'd like to have as an AMA and we'll look for a host!

Forno Bravo
See more
See less

Professionale 120 special

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Professionale 120 special

    We have purchased a professionale 120 oven kit which has a stainless steel vent chamber. This has side walls and a double skin above with 8" penetration. The kit did not include instructions for assembly and my search on forum and elsewhere has not provided an answer.
    The opening of the dome has a metal plate with pins for mounting the included insulated hinged door. The rear of the ss vent chamber has flanges which abut the door mounting plate. Is the mortar provided with the kit suitable for sealing between the metal door mounting plate and the stainless steel vent chamber?
    TWM

  • #2
    Re: Professionale 120 special

    Wow. I am surprised it didn't come with instructions. I have no clue as to the answer to your question, but you can download the instructions here

    http://www.fornobravo.com/PDF/commercial_install.pdf

    Hope that helps!
    My build progress
    My WFO Journal on Facebook
    My dome spreadsheet calculator

    Comment


    • #3
      Re: Professionale 120 special

      Deejayoh,
      The commercial install document has no reference to the stainless steel vent chamber.
      I use the term vent chamber to describe the portion of the oven in front of the door.
      The illustrations in the commercial install document show refractory clay surrounding the area in front of the door.

      Comment


      • #4
        Re: Professionale 120 special

        What was your solution to this? I have the 110 Trailer Edition and have faced the same issues about the instructions.

        Any advice?

        Chris

        Comment


        • #5
          Re: Professionale 120 special

          Chris,

          I applied Stove Bright RTV high temperature silicone sealant to the gaps between the oven dome stainless steel vent chamber and the brick arch which came with the oven kit.
          Blanket insulation was used over the vent chamber and dome followed by a cement and sand render.
          Hope this is of assistance.

          Trevor

          Comment


          • #6
            Re: Professionale 120 special

            thanks Trevor,

            You confirmed what my solution was yesterday. I too used the high temp silicone. Although, I did not use the insulation over the vent, but now that you mention it, I probably should.

            Do you have nay pictures of your process that you can share? I did not get the brick arch with my kit.

            Thanks

            Chris

            Comment


            • #7
              Re: Professionale 120 special

              Chris,

              I have some recent photos showing the stainless steel vent chamber and brick arch.

              Trevor

              Comment

              Working...
              X