web analytics
Hexagon house enclosure - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse

Photo Galleries are back! Instructions below.

Dear forum users,
Thank you for your patience with the Photo galleries. We've got your galleries online!
We have finished writing a custom script to migrate the PhotoPlog to vBulletin5’s albums.

Unfortunately V-Bulletin killed the "Photoplogs" in their software upgrade which was unforeseen and we're the first development group to have written a script for getting the galleries back... that said, it took some time to reverse engineer the code and get the albums to move over seamlessly!

Forum users will be able to access their “PhotoPlog” images through their user profile page by clicking on the “Media” tab.
They will also be able to browse other albums by going to the albums page. (On the forum site, there is a link in the black bar beside “Forums” to the albums.)

In order for users to create an album please follow the steps below.
1) Go to user profile page and click “Media”
2) Click Add Photos
3) Enter Photo Gallery Title in the first field
4) Click Upload or Select from Photo Album to add photos
5) Click Post
6) Once posted, the album will be created as a “Topic” on the albums page for the public to see. The topic title will be the “Photo Gallery Title” they created before uploading their photos.


To create this migration path we used vBulletin5’s default album structure. Unfortunately, it won’t work like the “PhotoPlog” but is an album/gallery component on the forum now.
See more
See less

Hexagon house enclosure

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Hexagon house enclosure

    Hi. New to forum. Please excuse if answered elsewhere before.
    Planning on building casa90 2G. Want to build a hexagon shape around oven with chimney in center of roof. Can I angle chimney back 30degrees or more to put in center of structure without effecting performance of oven? Are the necc. clearances 1"+4" of insulation. If oven is insulated and I maintain clearances , can I use wood studs, esp. for roof? What would I need for min. dimensions around base for a hexagon shape with casa902G? Any input appreciated. Thanks, Steve

  • #2
    Re: Hexagon house enclosure

    Can I angle chimney back 30degrees or more to put in center of structure without effecting performance of oven?
    Thirty degrees Yes. More, no. Building code calls for a maximum number 2 of bends in a flue, and a maximum angle of thirty degrees, because that's the steepest bend you can get a flue cleaning brush through.
    If oven is insulated and I maintain clearances , can I use wood studs, esp. for roof?
    Wood studs are not recommended for the walls, but builders have used wood rafters successfully. Your dome shouldn't heat up much on top of the insulation, but it can get hot around the door and flue. Be sure to maintain two inches of clearance to combustibles around your flue system.
    My geodesic oven project: part 1, part 2

    Comment

    Working...
    X