web analytics
Foam support clay brick dome - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse

Photo Galleries are back! Instructions below.

Dear forum users,
Thank you for your patience with the Photo galleries. We've got your galleries online!
We have finished writing a custom script to migrate the PhotoPlog to vBulletin5’s albums.

Unfortunately V-Bulletin killed the "Photoplogs" in their software upgrade which was unforeseen and we're the first development group to have written a script for getting the galleries back... that said, it took some time to reverse engineer the code and get the albums to move over seamlessly!

Forum users will be able to access their “PhotoPlog” images through their user profile page by clicking on the “Media” tab.
They will also be able to browse other albums by going to the albums page. (On the forum site, there is a link in the black bar beside “Forums” to the albums.)

In order for users to create an album please follow the steps below.
1) Go to user profile page and click “Media”
2) Click Add Photos
3) Enter Photo Gallery Title in the first field
4) Click Upload or Select from Photo Album to add photos
5) Click Post
6) Once posted, the album will be created as a “Topic” on the albums page for the public to see. The topic title will be the “Photo Gallery Title” they created before uploading their photos.


To create this migration path we used vBulletin5’s default album structure. Unfortunately, it won’t work like the “PhotoPlog” but is an album/gallery component on the forum now.
See more
See less

Foam support clay brick dome

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Foam support clay brick dome

    Howdy All;
    I have just completed my oven and have the styrofoam supports that worked well to support the building of the dome. There is only one that is cracked, the first one I took out, after that they are intact. If anyone is planning on building a 42" inside diameter dome this might be for you. The height is 22". They were cut from two 4 x 8 sheets of 1" styrofoam.

    They are yours if you need them.
    Ron Ulrich, Fremont, CA

  • #2
    Re: Foam support clay brick dome

    how did you made mortar for arch? I read some where that to make mortar for arch use 10 part sand, 6 part fire clay, 3 part lime and 2 part portland cement. Is this work?

    Comment

    Working...
    X