If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Forum Issues Update
We are continuing to work diligently to resolve the issues currently being experienced with the PhotoPlog. Thank you for your patience!
As I am in a wheelchair and can't build my own oven i managed to find some guys that could. I found them at belloforno.co.uk, and will post the project as it gets on the way! Anyone else used this business before?
If they are going to design and build it, perhaps you should buy a peel now and play with it and measure the exact hight that would be best for you so you can reach into the oven and also the depth that you can comfortably reach with it.
Looks like a professional site tho, will be very interesting to see how they plan to build it vs the FB plans, if you have not I recomend getting the plans from here (they are free) and having a good read so you know whats going on.
good to see more UK folk on here, and all the best with the deign and build
You might try setting up a table at that height and flopping things around on it with the peel - use a couple cans to represent the door. That'll give you a really good idea about the working height. It's a lot easier to raise or lower it before the build than after.
"He is no fool who gives what he cannot keep to gain what he cannot lose." - Jim Elliot
"Success isn't permanent and failure isn't fatal." -Mike Ditka