web analytics
Plumbing Question - Forno Bravo Forum: The Wood-Fired Oven Community


1 of 3 < >

Forum Page Loading Response

Forum Members:

We have received feedback regarding recent issues with page loading response time. We believe the slow response issue stems from the analytics we added with the new Forum. We are in the process of reconfiguring those elements and, after an approximate 24-hour time period for the reconfiguration to run, we anticipate a return to normal page load times. Thank you for your patience!
2 of 3 < >


Hello, Forno Bravo Community Forum members.

As many may have noticed already, the Community Forum site was briefly down today. While working on scheduled routine maintenance, we encountered an error when trying to add a software update. As the site is now back up and running, some of you may notice that some recent data has been misplaced from November 10th up to today. We are currently working on resolving the issue. The forum has full operational capabilities and we encourage all forum members to continue actively posting in the threads.

We apologize for any inconvenience that this issue may have caused you. The Forno Bravo family values each and every member of our community. If you have any issues or concerns, please feel free to let us know on our issues thread here:


Thank you for understanding.
3 of 3 < >

Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

Plumbing Question

  • Filter
  • Time
  • Show
Clear All
new posts

  • Plumbing Question

    I need to replace everything from the water supply valve on up on the toilet. I hadn't bothered before now because we were still trying to get the septic tank dealt with - and having the toilet shut off meant I couldn't accidentally over flow the bowl.

    Well, one pumping, four weeks trying and failing to get a repair estimate, one repairman's evaluation (different contractor - if you're ever in need of septic repair in Alabama I know just the guy you need!) and a plumber later and the bowl flushes properly - on a side note, a shirt is not an adequate substitute for a seal between the pipe and the septic tank Name:  940aa19a4d5e244e7e7b88a72bfe2ca2.gif
Views: 3
Size:  5.5 KB. So now it's time to repair the rest of the toilet.

    Okay, I read all the directions and I think I can do this (it's a girl thing - we are genetically programmed to read the instructions). but it has been really, really cold down here and will be pretty cold the rest of the week (it snowed! It is not supposed to snow in Alabama!!!) so I'm wondering if it would be best to wait until it's warmer. All the parts I'm working on are in the house but I'm going to be replacing the water supply valve which is just barely in the house (stupid wannabe plumber stuck the thing almost into the subfloor. Well, at least this one turns ) which worries me some.

    Whatta you guys think? Wait for warmer weather or go for it?
    "He is no fool who gives what he cannot keep to gain what he cannot lose." - Jim Elliot

    "Success isn't permanent and failure isn't fatal." -Mike Ditka

  • #2
    Re: Plumbing Question

    Go for it!!!
    My oven progress -


    • #3
      Re: Plumbing Question

      Have at it. I am currently replacing the floor, subfloor, toilet and water damaged joists in the only bathroom in my house. The outside temp is about 34 degrees so the cold air under the house encourages me to work quickly. That and the fact I have to remount the toilet every 3 or 4 hours so it can be used. The job is really pretty simple. Just tiresome.

      Sharpei Diem.....Seize the wrinkle dog


      • #4
        Re: Plumbing Question

        I thought I was the only one doing bathroom remodeling...I think you'll be OK Archena...I cut a hole in a bedroom wall to take out the original bathtub in our house...tore out 1 inch thick cement walls that were screeded on like stucco...replaced all the tile(walls and floor)...tomorrow finish up tiling then grouting...then new vanity, sink and toilet install...Oh by the way I recommend get the taller toilet...even if you are shorter the extra 2 inches is great on the knees...well maybe not a good idea if you have very young children though
        Good luck everyone!
        "Making the simple complicated is commonplace; making the complicated simple, awesomely simple, that's creativity. " Charles Mingus
        "Build at least two brick ovens...one to make all the mistakes on and the other to be just like you dreamed of!" Dutch