web analytics
looking for - Forno Bravo Forum: The Wood-Fired Oven Community


1 of 2 < >


Hello, Forno Bravo Community Forum members.

As many may have noticed already, the Community Forum site was briefly down today. While working on scheduled routine maintenance, we encountered an error when trying to add a software update. As the site is now back up and running, some of you may notice that some recent data has been misplaced from November 10th up to today. We are currently working on resolving the issue. The forum has full operational capabilities and we encourage all forum members to continue actively posting in the threads.

We apologize for any inconvenience that this issue may have caused you. The Forno Bravo family values each and every member of our community. If you have any issues or concerns, please feel free to let us know on our issues thread here:


Thank you for understanding.
2 of 2 < >

Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

looking for

  • Filter
  • Time
  • Show
Clear All
new posts

  • looking for

    hey everyone.

    a while back i saw someones plans and pics of an oven they had build using square metal tube for the framework. they made a metal form to pour the hearth on and finished the outside with cement board.
    Sorry, sounds vague but im trying to keep it short and sweet.
    If anyone can direct/link me to this oven thread i would greatly appreciate it.


  • #2
    Re: looking for

    Hi Keith..............this may be what you are looking for................



    • #3
      Re: looking for


      I took the pics of some of my FB installation jobs that used steel stands. A blacksmith nearby fabricates them for me and delivers to the job sites. Your location is Toronto, and I'm to the north and east of the city: Prince Albert/Port Perry. Send me an email, and I'll forward more pics if you like. The square tube legs use 1/4" stock, the tray is made from angle iron, and the cross of strap steel inside the tray is 1/4" flat stock. The tray is then floored with 1/2" cement board, a rebar and mesh grid is added, and cement is poured into it. Plenty strong.

      "Made are tools, and born are hands"--William Blake, 1757-1827