web analytics
Bad Word! Bad Word! Bad Word! Stupid Locking Bolts! Bad Word! Bad Word! - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse

New Forno Bravo Forum Feature

Forno Bravo Forum Community,

You will notice a new forum at the top of the main page called, "Ask Me Anything". This forum will be used for live one hour "Ask Me Anything" (AMA) sessions hosted by people who are knowledgeable in different areas pertaining to wood fired ovens. How it works:
- Each AMA will have a "sticky" thread where the community can post questions they would like answered during the live session. This will allow everyone to participate even if you can't be online for the live session. These questions will not be answered by the host until the live AMA; if you need an answer quickly, you should post it in the appropriate Forum area for the community to respond.
- Another thread will be posted for the live AMA. Registered users who are logged in during the live session can interact with the host by asking questions and receiving responses.
- The live thread will remain in the AMA forum to view after the session.

To kick off our AMA feature, we have invited author, chef and master bread maker and host of Pizza Quest, Peter Reinhart, to be our first host! Peter will be in the Forum on Monday, February 15th, from 7:00 - 8:00 pm EST. If you are unable to be online during the live session, you can post your questions in the sticky post. Peter will answer those questions during the live session on February 15th. You can view Peter's answers to your questions as well as what happened during the live session in the session thread.

We hope you enjoy this new feature! Please let us know if there is a topic that you'd like to have as an AMA and we'll look for a host!

Forno Bravo
See more
See less

Bad Word! Bad Word! Bad Word! Stupid Locking Bolts! Bad Word! Bad Word!

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Bad Word! Bad Word! Bad Word! Stupid Locking Bolts! Bad Word! Bad Word!

    Bad Word!


    I have to remove six of the things so how many work right? One! One little bolt actually fits into its little square thingie so I can loosen it! What do the rest do? Twirl around like little rusty ballerinas. Do you know how long it takes to hacksaw through 5 bolts?!

    Arrrgggghhhh!!!! Bad Word!

    Name:  ce40b5ccae5208613fcebe5f5add1b26.gif
Views: 2
Size:  1.1 KB
    "He is no fool who gives what he cannot keep to gain what he cannot lose." - Jim Elliot

    "Success isn't permanent and failure isn't fatal." -Mike Ditka
    [/CENTER]

  • #2
    Re: Bad Word! Bad Word! Bad Word! Stupid Locking Bolts! Bad Word! Bad Word!

    Just let it all out Archena!
    Go on and say it, you'll feel much better.
    Have you ever heard of a small angle grinder and those newish 1mm thin cutting blades? You can buy them for only a few dollars, they work an absolute treat and you have it for the next job, time and time again.
    We have a discount auto store called Supercheap that had 4" angle grinders (and 500W reversing hammer drills) for $9.95 with a 2 year replacement warranty. Well I bought around 12 of each for the kids, friends and spares. I still have a couple but they don't last forever but for people like you who only use them occassionally and probably much less harder than I, they will last for years.
    The 'dynabolts (those
    One little bolt actually fits into its little square thingie
    are a hardened steel and not really designed to be hack sawed!

    Neill
    Prevention is better than cure, - do it right the first time!

    The more I learn, the more I realise how little I know


    Neillís Pompeiii #1
    http://www.fornobravo.com/forum/f8/n...-1-a-2005.html
    Neillís kitchen underway
    http://www.fornobravo.com/forum/f35/...rway-4591.html

    Comment


    • #3
      Re: Bad Word! Bad Word! Bad Word! Stupid Locking Bolts! Bad Word! Bad Word!

      Sigh... One left - and I'm having to saw backwards. My elbow is gonna fall off...

      An angle grinder would eat the other components (let's face it, skillful, I'm not). I'm having a hard time keeping the saw blade away from them. I don't have enough room by the nut so I'm having to saw where the washers are. Of course, had I thought of that earlier I'd have made a trip to Lowes and given it a try. (Hmm, now that I think about it, I have seen them at Fred's as well.)

      Thanks for the suggestion - I will probably pick one up next paycheck. I have to go finish cutting that (*%&*&% bolt so I can get the darn swing set into the back yard*.




      *It's a long story. I need storage space so I got two swing sets from the folks down the street who were throwing them out. A tarp and some pallets will eventually become involved... No, I don't always over complicate things - why do you ask?
      Last edited by Archena; 11-29-2009, 03:26 PM.
      "He is no fool who gives what he cannot keep to gain what he cannot lose." - Jim Elliot

      "Success isn't permanent and failure isn't fatal." -Mike Ditka
      [/CENTER]

      Comment


      • #4
        Re: Bad Word! Bad Word! Bad Word! Stupid Locking Bolts! Bad Word! Bad Word!

        When the need arises - I use a Dremel tool with the abrasive blades. Will cut through a bolt with no problem. If you bind the blade they will shatter fairly easy. I think Harbor Freight may have a cheap knock off.

        4000 High Performance Rotary Tool / Model: 4000

        Les...
        Check out my pictures here:
        http://www.fornobravo.com/forum/f8/les-build-4207.html

        If at first you don't succeed... Skydiving isn't for you.

        Comment


        • #5
          Re: Bad Word! Bad Word! Bad Word! Stupid Locking Bolts! Bad Word! Bad Word!

          Mission accomplished!!!!

          Name:  8f3556b350c7d12dcb01cd2579e82ecd.gif
Views: 1
Size:  1.2 KB


          I'd like to thank Neil for his encouragement; my Dad for teaching me patience, perseverance and how to properly load and secure things!; my poor little hacksaw and its now mangled beyond recognition blade; and, of course, the Lord for all of the above!

          Name:  dcf1fb5a4888ac5030c36e93196804ff.gif
Views: 1
Size:  1.6 KB


          My elbow may never speak to me again... Oww... Name:  efc257938bb486f36a478ab29394fd5e.gif
Views: 1
Size:  8.4 KB
          "He is no fool who gives what he cannot keep to gain what he cannot lose." - Jim Elliot

          "Success isn't permanent and failure isn't fatal." -Mike Ditka
          [/CENTER]

          Comment


          • #6
            Re: Bad Word! Bad Word! Bad Word! Stupid Locking Bolts! Bad Word! Bad Word!

            Thanks, Les! I'll check it out.

            I still have six more on the other swing set...

            Ooooooooowwwww!!!!!!
            "He is no fool who gives what he cannot keep to gain what he cannot lose." - Jim Elliot

            "Success isn't permanent and failure isn't fatal." -Mike Ditka
            [/CENTER]

            Comment

            Working...
            X