web analytics
WTB latest Hendo tool design - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse

I'm Peter Reinhart! Ask Me Anything! Monday, February 15, 2016 7:00-8:00 pm EST

To kick off our AMA feature, we have invited author, chef and master bread maker and host of Pizza Quest, Peter Reinhart, to be our first host! Peter will be in the Forum on Monday, February 15th, from 7:00 - 8:00 pm EST. If you are unable to be online during the live session, you can post your questions in the sticky post. Peter will answer those questions during the live session on February 15th. You can view Peter's answers to your questions as well as what happened during the live session in the session thread.

Ask Me Anything New Forum Feature

You will notice a new forum at the top of the main page called, "Ask Me Anything". This forum will be used for live one hour "Ask Me Anything" (AMA) sessions hosted by people who are knowledgeable in different areas pertaining to wood fired ovens. How it works:
- Each AMA will have a "sticky" thread where the community can post questions they would like answered during the live session. This will allow everyone to participate even if you can't be online for the live session. These questions will not be answered by the host until the live AMA; if you need an answer quickly, you should post it in the appropriate Forum area for the community to respond.
- Another thread will be posted for the live AMA. Registered users who are logged in during the live session can interact with the host by asking questions and receiving responses.
- The live thread will remain in the AMA forum to view after the session.

We hope you enjoy this new feature! Please let us know if there is a topic that you'd like to have as an AMA and we'll look for a host!

Forno Bravo
See more
See less

WTB latest Hendo tool design

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • WTB latest Hendo tool design

    Please e-mail if you can help me find one of those latest hendo tools, like this indespensable tool.
    Lee B.
    DFW area, Texas, USA

    If you are thinking about building a brick oven, my advice is Here.
    Our One Meter Pompeii Oven album is here.
    An album showing our Thermal Breaks is Here.

    I try to learn from my mistakes, and from yours when you give me a heads up.

  • #2
    WTB latest indespensable tool design -used

    To The Top....Please e-mail if you know where one of these tools is available

    Lburou@aol.com
    Lee B.
    DFW area, Texas, USA

    If you are thinking about building a brick oven, my advice is Here.
    Our One Meter Pompeii Oven album is here.
    An album showing our Thermal Breaks is Here.

    I try to learn from my mistakes, and from yours when you give me a heads up.

    Comment


    • #3
      Re: WTB latest Hendo tool design

      These tools are home built...not something you can run out and purchase.
      Hendo was an early forum member who was very meticulous with his build, developing the tool for precision. Many others have since taken the design and tinkered with it, either to improve or simply to utilize materials they already had.

      Unless someone is willing to lend, trade, or sell the tool they made, you will have to make your own.

      Personally, I don't see the need. You can literally have half of your dome built in the time it takes to make the tool. That said, if I could have gone to my local HD or Lowes and picked one up while acquiring materials, I probably would have.

      RT

      Comment


      • #4
        Re: WTB latest Hendo tool design

        Originally posted by RTflorida View Post
        These tools are home built...not something you can run out and purchase.
        Hendo was an early forum member who was very meticulous with his build, developing the tool for precision. Many others have since taken the design and tinkered with it, either to improve or simply to utilize materials they already had.

        Unless someone is willing to lend, trade, or sell the tool they made, you will have to make your own.

        Personally, I don't see the need. You can literally have half of your dome built in the time it takes to make the tool. That said, if I could have gone to my local HD or Lowes and picked one up while acquiring materials, I probably would have.

        RT

        Thanks for your thoughts

        Thing is, for my own reasons, I do see the need for this tool and don't have the means to produce it. I've seen posts here where these tools have been loaned/sold to new builders. That is what I'm looking for in this thread.
        Lee B.
        DFW area, Texas, USA

        If you are thinking about building a brick oven, my advice is Here.
        Our One Meter Pompeii Oven album is here.
        An album showing our Thermal Breaks is Here.

        I try to learn from my mistakes, and from yours when you give me a heads up.

        Comment


        • #5
          Re: WTB latest Hendo tool design

          Being a member who helped finish Paul's (Hendo) oven after his death. See

          http://www.fornobravo.com/forum/f8/h...nues-3902.html

          I imagine that his invaluable tool is still at his property and if you like I will contact his wife to see if it can become available for other members to use.

          Neill
          Prevention is better than cure, - do it right the first time!

          The more I learn, the more I realise how little I know


          Neillís Pompeiii #1
          http://www.fornobravo.com/forum/f8/n...-1-a-2005.html
          Neillís kitchen underway
          http://www.fornobravo.com/forum/f35/...rway-4591.html

          Comment


          • #6
            Re: WTB latest Hendo tool design

            Originally posted by nissanneill View Post
            Being a member who helped finish Paul's (Hendo) oven after his death. See

            www.fornobravo.com/forum/f8/hendos-oven-continues-3902.html

            I imagine that his invaluable tool is still at his property and if you like I will contact his wife to see if it can become available for other members to use.

            Neill
            Neill, that is a wonderfully grand offer!

            If we were a little closer I'd jump on it. Can you imagine that little tool getting boxed up and shipped -who knows how- to the other side of the world! Fortunately, the idea of Hendo's tool has already made the trip to this side of the world, so you don't have to send it.

            If lending the tool is agreeable, then do it within that friendly nation of Australia, I'll find one a bit closer if you don't mind. I have it on good authority that there are several available here in the USA and I'll just wait for one close by.

            Your offer to help is going an extra mile to help someone you don't even know, awesome character you have there in Australia.

            You are a stand up guy Neill, in any case, Thanks for the offer.
            Last edited by Lburou; 12-19-2010, 08:47 AM.
            Lee B.
            DFW area, Texas, USA

            If you are thinking about building a brick oven, my advice is Here.
            Our One Meter Pompeii Oven album is here.
            An album showing our Thermal Breaks is Here.

            I try to learn from my mistakes, and from yours when you give me a heads up.

            Comment

            Working...
            X