web analytics
Today's attempt - Forno Bravo Forum: The Wood-Fired Oven Community


1 of 2 < >


Hello, Forno Bravo Community Forum members.

As many may have noticed already, the Community Forum site was briefly down today. While working on scheduled routine maintenance, we encountered an error when trying to add a software update. As the site is now back up and running, some of you may notice that some recent data has been misplaced from November 10th up to today. We are currently working on resolving the issue. The forum has full operational capabilities and we encourage all forum members to continue actively posting in the threads.

We apologize for any inconvenience that this issue may have caused you. The Forno Bravo family values each and every member of our community. If you have any issues or concerns, please feel free to let us know on our issues thread here:


Thank you for understanding.
2 of 2 < >

Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

Today's attempt

  • Filter
  • Time
  • Show
Clear All
new posts

  • Today's attempt

    I welcome comments and criticisms.

    2.5 kg total weight, 70% hydration.

    Nine hour starter expansion from 100g to 500g.

    Nine hour bulk ferment at room temperature (78 degrees in my kitchen). That was scary, but I though I'd give Ed Wood's method a try. The dough massively expanded, but the gluten structure hadn't collapsed. When I degassed for shaping, the smell of alcohol was strong. I figured that I was well and truly overproofed, and that the dough was probably going to fail to rise once shaped. So i didn't bother with making anything pretty.

    I wrapped my brotforms in plastic wrap and covered the with a damp towel to keep humidity in. Contrary to my expectations, the shaped loaves rose quite well, and I figured they were oven-ready about two hours after shaping. I slashed the rounds (forgot to slash the loaves) and loaded them.

    I followed Jay's suggestions after my last bake for steaming the oven, loaded the loaves, and closed the door for 25 minutes. At 25 minutes, the loaves were at 180 degrees. Another 10 minutes took them to just over 200. Results appear in the attachments.

    The crust was nice and crispy, the crumb was slightly chewy and pleasing to the mouth. The sour flavor was much more prevalent than last week's loaves, but it was still a pleasant sour undertone.

    I'm pretty sure my oven hadn't loaded all the heat it needed. The temperature dropped over 100 degrees during the bake. But I sort of expected a big temperature drop because I started the fire late and had to rake it out early to coincide with complettion of the loaf proofing. I think I could have gone longer on the loaf proof, but I was really worried that the yeast had already eaten too much sugar and that there wouldn't be enough for the loaves to brown up nicely.
    Attached Files
    Last edited by azatty; 09-30-2012, 07:41 PM.

  • #2
    Re: Today's attempt

    Very interesting...

    11 hours at 78 is a very long bulk plus final proof time. But your color and oven spring suggest you weren't as "over" as you should have been.

    So... either your starter was not fully robust when you started (I have gotten to the point that I feed my starter about 12 hours before I do the expansion to make sure it is robust.) or the 9 hours was too short (which it is in my experience) so the expansion was not peaking... or both.

    The first photo shows pretty good loaf color which says you weren't too badly over. The third shows some gray which I tend to associate with over.

    The oven was clearly a bit cool and IMO you baked pretty severely short. The edges of the slash should ideally be approaching black (okay dark brown). Take a look at Chris's loaves.

    Also.. for artisanal loaves I think you should shoot for a minimum of 205 and I prefer 210 to 211.

    Oven temp actually drops a lot more than a hundred during a bake. It drops a lot on loading and as steam fillls the oven and then the temp rebounds during the bake and should be rising at the end. In a properly loaded bread oven with appropriate mass the temp should rise to at least 25 to 50 degrees below the starting temp as the oven recharges after the first load. I get about 50 below with 12 pound batches and only an extra inch of cladding on my Casa oven. A real bread oven or heavily clad pizza oven should recover further.

    Hand in there! Bake On!