web analytics
Protective Cover - TBird 20 QT Mixer - Forno Bravo Forum: The Wood-Fired Oven Community


1 of 3 < >

Forum Page Loading Response

Forum Members:

We have received feedback regarding recent issues with page loading response time. We believe the slow response issue stems from the analytics we added with the new Forum. We are in the process of reconfiguring those elements and, after an approximate 24-hour time period for the reconfiguration to run, we anticipate a return to normal page load times. Thank you for your patience!
2 of 3 < >


Hello, Forno Bravo Community Forum members.

As many may have noticed already, the Community Forum site was briefly down today. While working on scheduled routine maintenance, we encountered an error when trying to add a software update. As the site is now back up and running, some of you may notice that some recent data has been misplaced from November 10th up to today. We are currently working on resolving the issue. The forum has full operational capabilities and we encourage all forum members to continue actively posting in the threads.

We apologize for any inconvenience that this issue may have caused you. The Forno Bravo family values each and every member of our community. If you have any issues or concerns, please feel free to let us know on our issues thread here:


Thank you for understanding.
3 of 3 < >

Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

Protective Cover - TBird 20 QT Mixer

  • Filter
  • Time
  • Show
Clear All
new posts

  • Protective Cover - TBird 20 QT Mixer

    I had been on the lookout for some time for a suitable cover to protect my newly acquired TBird mixer. It was an odd shape so this didn't make finding one very easy. Eventually one day whilst I was in the local hardware store (Bunnings) and I found a Weber BBQ cover that was ideal and for only $7.

    The design is for a round object but because the mixer has bits sticking out the side this makes it a perfect shape for putting onto the mixer. Additionally it has an elastic section at the bottom so the cover pulls in against the body of the mixer to prevent dust etc getting inside.

    Attached Files
    / Rossco

  • #2
    Re: Protective Cover - TBird 20 QT Mixer

    Hey Rossco,
    I just fling over a thin part bed sheet over my two mixers and all is fine. Occasionally the wind blows it off and I simply put it back over!

    Prevention is better than cure, - do it right the first time!

    The more I learn, the more I realise how little I know

    Neillís Pompeiii #1
    Neillís kitchen underway


    • #3
      Re: Protective Cover - TBird 20 QT Mixer

      Yes I started with some "bedding" too - see it in the background of the pic.

      Wasn't quite right so decided to splash out on the real deal!! I know I'm a squanderer ...but ... ;-))

      / Rossco