web analytics
The KitchenAid 600 works pretty well - Forno Bravo Forum: The Wood-Fired Oven Community


1 of 2 < >


Hello, Forno Bravo Community Forum members.

As many may have noticed already, the Community Forum site was briefly down today. While working on scheduled routine maintenance, we encountered an error when trying to add a software update. As the site is now back up and running, some of you may notice that some recent data has been misplaced from November 10th up to today. We are currently working on resolving the issue. The forum has full operational capabilities and we encourage all forum members to continue actively posting in the threads.

We apologize for any inconvenience that this issue may have caused you. The Forno Bravo family values each and every member of our community. If you have any issues or concerns, please feel free to let us know on our issues thread here:


Thank you for understanding.
2 of 2 < >

Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

The KitchenAid 600 works pretty well

  • Filter
  • Time
  • Show
Clear All
new posts

  • The KitchenAid 600 works pretty well

    We've been putting our 6 quart KitchenAid through a lot recently. It seems to up to the task -- the only complaint I have is that can be pretty loud (as though it is complaining). Still, watching Peter make it work the other day with the Caputo flour was a lot of fun. I keep reading stand mixer reviews, and it sounds like there is a Viking model with a little more capacity and a larger engine, if you want the biggest mixer you can put in a home kitchen. Of course it costs more.

    I am going to be posting a summary of everything I learned the other day about dough and proofing, which was a lot. For now, I am happy with my KitchenAid and very happy with the Caputo flour.

    Pizza Ovens
    Outdoor Fireplaces

  • #2
    i keep meaning to post my dough recipe/ preparation on here, because it has worked wonderfully for me. i also use the kichenaid 600 professional, and if you make a large dough, it certainly "groans" at you. the old ones would groan and then the plastic gears would just strip out.

    i have made dough commercially for years, so i have a bit of a leg up, but i just followed the official pizza nepolitana dough recipe laid out here:


    ...by the italian ministry of agriculture. explaining proper mixing and handling is hard if you've never done it before, and honestly at this point i don't even follow the recipe strictly, but rather add water proportionate to about how many dough balls i know it makes (1/2 L H2O) makes 5-6 doughballs), and then eyeball the flour. however, the explanation in that document is pretty decent.

    mix the dough adding the flour slowly for the first 10 minutes or so, for a total of 20 minutes or so, or until it is elastic and sticky, but only barely sticking to the bottom of the mixer. the looser (stickier) you make the dough, the easier it is to stretch out into a good pettola, but is also harder to get your peel under if you make it italian-style, where the pie is made on the counter and then the peel is used just to transfer it to the oven. i pretty much aim for it to be barely sticky, and barely sticking to the bottom of the mixing bowl just at the bottom of the dough ball.

    then i leave the entire dough oiled and covered with plastic or a damp cloth for 2-4 hours. then i cut them into 125-200g pieces and ball them up (this part takes some practice...maybe i'll give an explanation later if anyone's interested). oil and cover, and proof until they are workable, which is usually 2 hours or so, depending on how loose the dough was made. you kinda have to work one to see if they're ready, but a good rule of thumb (pun intended) is that a finger pressed into the doughball should leave an indentation. if it springs back up, it's not ready.
    Last edited by paulages; 10-07-2005, 02:17 PM.
    overdo it or don't do it at all!


    • #3

      (M) Hey Paul,

      The link you referenced for pizza dough, at


      gets me to:

      "The Pompeii Oven: Plans to Build an Italian Brick Oven"

      (M) Also, when you wrote:

      (P) "but a good rule of thumb (pun intended) is that a finger pressed into the doughball should leave an indentation. if it springs back up, it's not ready."

      (M) ....seems counter intuitive. An unrisen dough ball will also leave an indentation, or won't it? ______

      (M) Please reassure me as I'm counting on your commercial experience.


      "Everything should be made as simple as possible, ...
      but no simpler!" (Albert Einstein)


      • #4
        don't know why it did that, but i fixed it.

        when you form the doughball, you are compacting the dough that has already proofed (fermented and expanded) once, into a tight doughball. at this point, it will be far too tight to leave an indentation in. this effect is the same reason why you don't want to use a rolling pin when preparing the pettola: when you knead or press the dough, you are crushing the little airbubbles in the dough that have caused it to rise, toughening it up (making a tough crust instead of a nice delicate chewy one). when you hand-stretch the dough, you pressing lightly and stretching, resulting in less trauma.

        as it rises again and airbubbles form in the dough, it becomes softer, and this softness and accompanying elasticisty is what allows us to stretch it out. once there are enough airbubbles trapped inside the glutenous doughball, your thumb will crush them when you press on it, and the indentation will stay.
        overdo it or don't do it at all!


        • #5
          Bosch machine

          Has anyone here any experience with the Bosch Kitchen Machine? It looks interesting and they claim it will handle up to 12 lbs of dough.

          Renaissance Man
          Wholly Man


          • #6
            LA Times article

            Here is the LA Times article. It has comments on the larger mixers.


            Pizza Ovens
            Outdoor Fireplaces