web analytics
Old Iron is good iron; cookware that is! - Forno Bravo Forum: The Wood-Fired Oven Community


1 of 3 < >

Forum Page Loading Response

Forum Members:

We have received feedback regarding recent issues with page loading response time. We believe the slow response issue stems from the analytics we added with the new Forum. We are in the process of reconfiguring those elements and, after an approximate 24-hour time period for the reconfiguration to run, we anticipate a return to normal page load times. Thank you for your patience!
2 of 3 < >


Hello, Forno Bravo Community Forum members.

As many may have noticed already, the Community Forum site was briefly down today. While working on scheduled routine maintenance, we encountered an error when trying to add a software update. As the site is now back up and running, some of you may notice that some recent data has been misplaced from November 10th up to today. We are currently working on resolving the issue. The forum has full operational capabilities and we encourage all forum members to continue actively posting in the threads.

We apologize for any inconvenience that this issue may have caused you. The Forno Bravo family values each and every member of our community. If you have any issues or concerns, please feel free to let us know on our issues thread here:


Thank you for understanding.
3 of 3 < >

Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

Old Iron is good iron; cookware that is!

  • Filter
  • Time
  • Show
Clear All
new posts

  • Old Iron is good iron; cookware that is!

    Just reading a comment on cast iron cookware reminded me that some folks might not have thought of sourcing older cast iron ware. The fact is that a lot of the older designs and wares are no longer made, and in general the molding, casting and finishing was of a higher quality "in the old days". The iron also tends to be of a finer, more consistent grain. And of course the iron was also more often "virgin": uncontaminated by other metals and substances that are found in recycled iron, especially when cast overseas.

    I have a nice selection of griddles, pans, waffle irons, dutch oven etc., almost all of which I have bought at flea markets and garage sales. Often this old iron is covered in congealed dirt and oil and sometimes rust, and many people think it is impossible to clean as a result. In fact, it's very easy to make this old iron as good as new. I recently cleaned up a very finely molded 12" frying pan with pouring spouts and a tubular metal handle. This pan must be at least 80 years old.

    I put it and a nice waffle iron (the base isn't shown) I picked up in the oven and set it on a clean cycle. This burns off all the old oil and dirt, then I sand blast the pieces, wash in very hot water and dry them in the oven. It takes a LONG time to sand blast off anything that has any "softness" or "give" in it as the grit bounces off it. This includes thick grease & oil deposits etc., but after a trip through the oven, there is nothing left but fine ash and the iron blasts clean almost instantly.

    If I want to make any "improvements" to the castings I do that too, with files, grinder, sander etc. For example, glass range tops can easily be damaged by even a bit of roughness on the bottom of a pan. I smooth the bottoms of pans, irons & griddles etc. with an angle grinder fitted with an abrasive pad.

    After a wash and dry, coat with oil and into the oven at 325 for a few hours and you get a perfectly seasoned, ready to use antique! This kind of ironware is almost immortal. For example even rusty old pots used as planters for years can be brought back to usable condition quite easily. There are very few consumer products that last as well.

    Nothing makes waffles like a well-seasoned cast waffle iron, and AFAIK, they not made anywhere now.

    For cooking over a fire, camping or elsewhere, nothing stands rough use and evens out the inconsistencies of the heat as well as cast iron.

    Sorry if I'm preaching to the converted here!
    Attached Files
    Last edited by Salvager; 08-08-2012, 11:41 PM.

  • #2
    Re: Old Iron is good iron; cookware that is!

    Reduce, recycle, reuse.

    It is good for your Karma.

    I too haunt thrift shops and garage sales for cookware.


    • #3
      Re: Old Iron is good iron; cookware that is!

      Agreed on the old stuff, must keep my eye out there as well but not much so far

      I hunt our local cheaper end department stores during end of season sales, picked up some good Lodge brand stuff, decent width solid handle (not timber screw on) for as little as $20.. Seems to be that plain cast iron is not popular like all the fancy coatings and materials they flog for more $$$...... suits me though

      Build #1

      Build #2 (Current)